Page 468 - Mechanics of Asphalt Microstructure and Micromechanics
P. 468

460   C hapter T h ir te en


              Kadau, K., Germann, T.C. , Lomdahl, P.S. (2004). Large-scale molecular-dynamics simulation of
                 19 billion particles. International Journal of Modern Physics C, Vol.15, No.1, pp.193–201.
              Kandhal, P.S. (1994). Field and laboratory investigation of stripping in asphalt pavements: state
                 of the art report. Transportation Research Record, No.1454, pp.36–47.
              Kanitpong and Bahia, H. (2005). Relating adhesion and cohesion of asphalts to the effect of mois-
                 ture on laboratory performance of asphalt mixtures. Transportation Research Record,
                 No.1901, pp.33–43.
              Kassem, E., Masad, E., Bulut, R. and Lytton. R. (2006). Measurements of moisture suction and
                 diffusion coefficient in hot-mix asphalt and their relationships to moisture damage. Trans-

                 portation Research Record, No.1970, pp.45–54.
              Katsoulakis, M., Majda, A.J. and Vlachos, D.G. (2003). Coarse-grained stochastic processes and
                 monte carlo simulations in lattice systems. J. Comp. Phys., Vol.186, pp.250–278
              Kevrekidis, I., Gear, C.W. , Hyman, J.M., Kevrekidis, P.G., Runborg, O. and Theodopopoulos,
                 C.(2003). Equation-free coarse-grained multiscale computation: enabling microscopic
                 simulators to perform system-level analysis. Comm. Mathematical Sciences. Vol. 1, No. 4,
                 pp.715–762.
              Kim, Y.R., Lutif, J.S., Bhasin, A. and Little, D.N. (2008). Evaluation of moisture damage mecha-
                 nisms and effects of hydrated lime in asphalt mixtures through measurements of mixture
                 component properties and performance testing. Journal of Materials in Civil Engineering. Vol.
                 20, No.10, pp.659–667.
              Kim, Y.R., Little, D.N. and Lytton, R.L. (2004). Effect of moisture damage on material proper-
                 ties and fatigue resistance of asphalt mixtures. Transportation Research Record, No. 1891,
                 pp.48–54.
              Knap, J., and Ortiz M. (2001). An analysis of the quasi-continuum method. J. Mech. Phys. Sol.,
                 Vol.49, pp.1899–1923.
              Kohlhoff, S., Gumbsch P., and Fischmeister, H.F. (1991). Crack propagation in BCC crystals

                 studied with a combined finite-element and atomistic model. Phil. Mag. A, Vol. 64, No.4,
                 pp.851–878.
              Kolesik, M., Novotny, M. A. and Rikvold, P. (1998). Projection method for statics and dynamics
                 of lattice spin systems. Phys. Rev. Lett., Vol.80, pp.3384–3387
              Kringos, N. and Scarpas, A. (2008). Physical and mechanical moisture susceptibility of asphaltic
                 mixtures. International Journal of Solids and Structures, Vol.45, No.9, pp.2671–2685.
              Kringos, N., Scarpas, A. and deBondt, A. (2008). Determination of moisture susceptibility of
                 mastic-stone bond strength and comparison to thermodynamical properties. Journal of the
                 Association of Asphalt Paving Technologists. Vol.77, pp.435–478.
              Kringos, N. and Scarpas. A. (2005). Raveling of asphaltic mixes due to water damage: compu-
                 tational identification of controlling parameters. Transportation Research Record,  No. 1929,

                 pp.79–87.
              Kringos, N., Scarpas, A. and Kasbergen,C. (2007). Three dimensional elasto-visco-plastic fi nite
                 element model for combined physical-mechanical moisture induced damage in asphaltic
                 mixes. Journal of the Association of Asphalt Paving Technologists, Vol. 76, 2007, pp.495–524.
              Kutay, M.E., Aydilek, A.H. and Masad, E. (2007). Computational and experimental evaluation
                 of hydraulic conductivity anisotropy in hot-mix asphalt. International Journal of Pavement
                 Engineering, Vol. 8, No.1, pp.29–43.
              Kutay, E. (2009) Pore pressure and viscous shear stress distribution due to water flow within as-

                 phalt pore structure, Computer-Aided Civil and Infrastructure Engineering, Vol. 24, pp.212–224.
                                                                   nd
              Leach, A.R. (2001). Molecular Modelling: Principles and Applications, 2  Edition. Pearson Educa-
                 tion EMA.
   463   464   465   466   467   468   469   470   471   472   473