Page 171 - Lego Mindstorms

230_RIS_04.qxd 10/9/02 5:56 PM Page 156

Robot 4 • MINDSTORMS F1 Racer

Final Assembly Step 1

Place the steering assembly at the front of
the chassis. The 1x8 plates should fit
directly over the 1x4 brick.

Final Assembly Step 2

Place the steering motor over the
steering assembly. The motor should fit
into the spot made for it on the chassis. The
plate should go over the 1x2 bricks. The gear
should mesh with the rack. This is where the rack and
pinion come together. The rotational motion of the motor is
translated into horizontal motions of the rack.

Final Assembly Step 3

Put the bumper on the front of the chassis. The plates
of the bumper should fit onto the end of the chassis.

156