Page 247 - A Practical Introduction to Optical Mineralogy

10,---------------------------,
Bibliography

Atkin, B. P. and P. K. Harvey 1982. NISOMI-81 : an automated system for
opaque mineral identification in polished section. Process mineralogy II: appli-
cations in metallurgy, ceramics and geology. Conference Proceedings, The
Metallurgical Society of AIME, Dallas, 77-91.
Bastin, E. S. 1950. 1nterpretation of ore textures. Mem. Geol. Soc. Am. 45
Bloss, F. D. 1971. Crystallography and crystal chemistry. New York : Holt
R% Rinehart and Winston.
• Bowen, N. L. and J. F. Schairer 1935. The system Mg0-Fe0-Si0 2 • Am. J. Sci.
• quartz 229, 151-217.
orthoclase Bowie, S. H. U. and P.R. Simpson 1977. Microscopy: reflected-light. In Physical
• methods in determinative mineralogy, 2nd edn, J. Zussman (ed.). Londoa:
fluorite
Academic Press.
Bowie, S. H. U. and K. Taylor 1958. A system of ore mineral identification.
Mining Mag. (Land.) 99, 265-77, 337-45.
Buddington, A. F. and D. H. Lindsley 1964. Iron-titanium oxide minerals and
synthetic equivalents. J. Petrol. 5, 310--57.
Cameron, E. N. 1961. Ore microscopy. New York: John Wiley.
0'------- -----------------------'
Cervelle, B. 1979. The reflectance of absorbing anisotropic minerals. In Proceed-
Note that carbonates have a pronounced bireflectance and R 0 which is shown by ings of the 1974 ore microscopy summer school at Athlone, M. J. Oppenheim
all grains of a carbonate mineral is indicated by the wide end (maximum value) ol (ed.). Special Paper no. 3, 49-57. Geol. Surv. of Ireland.
the reflectance range. Commission of Ore Microscopy 1977./MA/COM quantitative data file, N. F. M.
Henry (ed.). London: Applied Mineralogy Group, Mineralogical Society.
Mineral Refractive indices Reflectances Craig, J. R. and D. J. Vaughan 1981. Ore microscopy and ore petrography. New
York: Wiley.
quartz, SiO, no = 1.544 nc = 1.553 R 0 = 4.6 R. = 4.7 Deer, W. A., R. A. Howie and J. Zussman 1962. Rock forming minerals, Vols
barite, BaSO, n. = 1.636 n , = 1.648 R. = 5.8 R , = 6.0 1-5. London: Longmans.
fluorite, CaF, n = 1.434 R = 3.2 Deer, W. A., R. A. Howie and J. Zussman 1966. An introduction to the rock-
orthoclase, KAISi,O, n. = 1.518 n , = 1.522 R. = 4.2 R , = 4.3 forming minerals. London: Longmans.
calcite, CaCO, n = 1.658 n. = 1.486 Ro = 6.1 R. = 3.8 Deer, W. A., R. A. Howie and J. Zussman 1978. Rock-forming minerals: single
dolomite, CaMg(CO,), no = 1.679 n. = 1.500 Ro = 6.4 R. = 4.0 chain silicates, Vol. 2A. London: Longmans.
ankerite, no = 1.710 nc = 1.515 Ro = 6.9 R. = 4.2 Edwards, A. B. 1947. Textures of the ore minerals. Melbourne: Austral. Inst.
Ca(Fe,Mg)(CO,), Min. Metal!.
siderite, FeCO, no = 1.875 n. = 1.635 R 0 = 9.3 R. = 5.8 Freund, H. (ed.) 1966. Applied ore microscopy. New York: Macmillan.
witherite, BaCO, n. = 1.529 n, = 1.677 R. = 4.4 R , = 6.4 Galopin, R. and N. F. M. Henry 1972. Microscopic study of opaque minerals.
London: McCrone Research Associates. Originally published by Heffer,
Cambridge.
Hallimond, A. F. 1970. The polarising microscope. York: Vickers Instruments.
Henry, N. F. M. (ed.) 1970--8. Mineralogy and materials news bulletin for micro-
scopic methods. London: Applied Mineralogy Group, Mineralogical Society.
Holdaway, M. H. 1971. Stability of andalusite and the aluminium silicate phase
diagram. Am. J. Sci. 271, 97-131.
IMNCOM 1977. Quantitative data file, First Issue. International Mineralogical
Association, Commission on Ore Microscopy. London: McCrone Research
Associates.
Judd, D. B. 1952. Colour in business, sciences and industry. New York: John
Wiley.

241