Page 94 - ARM Based Microcontroller Projects Using MBED
P. 94
80 7. USING THE Mbed WITH SIMPLE PROJECTS
7.3 NUCLEO-F411RE DEVELOPMENT BOARD PIN NAMES
When working with Mbed we need to know the names of the GPIO pins. These names can
be obtained by clicking at the top right-hand side of the Mbed environment where it says
NUCLEO-F411RE, or alternatively we can get the pin names from the following site:
https://os.mbed.com/platforms/NUCLEO-F411RE/
The Arduino connector top left and top right pin names are shown in Figs. 7.5 and 7.6, re-
spectively. Similarly, the ST morpho connector top left and top right pin names are shown in
Figs. 7.7 and 7.8, respectively.
FIG. 7.5 Arduino connector top left pin names.
