Page 263 - Advances In Productive, Safe, and Responsible Coal Mining

242 Advances in Productive, Safe, and Responsible Coal Mining

[13] Sijtsma P. In: CLEAN based on spatial source coherence. Proceedings of the 13th AIAA/
CEAS aeroacoustics conference, Rome, Italy, May 23–25; 2007. AIAA Paper 2007-3436.
[14] Tcherniak D, Schuhmacher AP. In: Application of decomposition-based technique in
NVH source contribution analysis. Proceedings of ISMA-2008, Leuven, Belgium; 2008.
[15] Title 30 CFR Part 62. Denver, CO, USA: U.S. Department of Labor, Mine Safety and
Health Administration, Information Resource Center; 2002–2011.
[16] Pettitt MR, Slone Jr. MR. Noise Study of Longwall Mining Systems. Contract Report JO
188072, Submitted by Wyle Laboratories to the United States Bureau of Mines; 1986.
January.
[17] Camargo HE, Yantek DS, Smith AK. In: Development of a validated finite element model
of a longwall cutting drum. Proceedings of Inter-Noise, New York, NY, USA; 2012.
[18] Camargo HE, Gwaltney G, Alcorn LA. Development of an instrumented longwall bit to
measure coal cutting forces for use in developing noise controls. Min Eng 2015;67:57–62.
[19] Yang J, Camargo HE, Yantek DS. In: Sound radiation modeling and correlation of a
longwall cutting drum. Proceedings of NOISE-CON, Denver, CO, USA; 2013.
[20] Yang J, Camargo HE, Yantek DS. In: Sound radiation analysis of a longwall cutting drum.
ASME IMECE, San Diego, CA, USA; 2013.
[21] Yang J, Camargo HE, Yantek DS. In: Noise control concepts for a longwall cutting drum.
Proceedings of NOISE-CON, Fort Lauderdale, FL, USA, September 8-10; 2014.
[22] Camargo HE, Alcorn LA. In: Evaluation of noise controls for longwall cutting drums. Pro-
ceedings of NOISE-CON, Providence, RI, USA, June 13-15; 2016.
[23] ISO. Acoustics – determination of sound power levels of noise sources using sound
pressure – engineering method in an essentially free field over a reflection plane.
Geneva, Switzerland: International Standard ISO 3744, International Organization for
Standardization; 1994.
[24] Peterson JS, Kovalchik PG, Matetic RJ. A sound power level study of a roof bolter. In:
Yernberg WR, editor. Transactions of Society for Mining, Metallurgy, and Exploration,
Inc. Vol. 320. Littleton CO, USA: Society for Mining, Metallurgy, and Exploration,
Inc; 2006. p. 171–7.
[25] Peterson JS, Alcorn LA. In: Results of noise measurements from underground testing of a
roof bolting machine duty cycle. Proceedings of NOISE-CON, Reno, NV, USA, October
22-24; 2007.
[26] Yantek DS, Peterson JS, Smith AK. In: Application of microphone phased array to identify
noise sources on a roof bolting machine. Proceedings of NOISE-CON, Reno, NV, USA,
October 22-24; 2007.
[27] Kovalchik P, Matetic RJ, Peterson JS. Noise controls for roof bolting machines. Min Eng
2009;61(1):74–8.
[28] Peterson JS. In: Development of a roof-bolting machine chuck isolator for drilling noise
reduction. Proceedings of NOISE-CON, Dearborn, MI, USA, July 28–30; 2008.
[29] Hawkes I, Burks JA. Investigation of noise and vibration in percussive drill rods. Int
J Rock Mech Min Sci Geomech Abstr 1979;16:363–76.
[30] Carlvik I. The generation of bending vibrations in drill rods. Int J Rock Mech Min Sci
Geomech Abstr 1981;18:167–72.
[31] Kovalchik P, Johnson M, Burdisso R, Duda F, Durr M. In: Noise control for continuous
miners. Proceedings from the 10th international meeting on low frequency noise and
vibration and its control, York, England, September 11-13; 2002. p. 299–306.
[32] Smith AK, Yantek DS, Peterson JS. In: Development and evaluation of a urethane jacketed
tail roller for continuous mining machines. Proceedings from IMECE, IMECE2007-
41821, Seattle, WA, USA, November 11-15; 2007.