Page 97 - Advances In Productive, Safe, and Responsible Coal Mining

Optimization of coal recovery and production rate as a function of panel dimensions 81

References

[1] Tien J. Room-and-pillar mining in coal. In: Darling P, editor. SME mining engineering
handbook. Littleton, CO: Society for Mining, Metallurgy and Exploration, Inc.; 2011.
p. 1339–46.
[2] Anani A, Awuah-Offei K, Hirschi JC. Application of discrete event simulation in optimi-
sing coal mine room-and-pillar panel width: a case study, Min Technol 2016;126:1–9.
Available from: http://www.tandfonline.com/doi/full/10.1080/14749009.2016.1195035.
[3] Fortune JAB, Crawshaw SAM. Developments in the application of underground battery
vehicles in the UK coal mining industry. Min Technol 1996;78(902):263–9.
[4] Schatz RS, Nieto A, Dogruoz C, Lvov SN. Using modern battery systems in light duty
mining vehicles. Int J Min Reclam Environ 2015;29(4):243–65.
[5] Chugh YP, Pytel W. In: Development of alternate room-and-pillar mining geometries for
improved extraction and ground control in coal and copper mines. Proceedings of the thir-
teenth international symposium on mine planning and equipment selection. Wroclaw:
CRC Press; 2004. p. 223.
[6] Hirschi JC. A dynamic programming approach to identifying optimal mining sequences
for continuous miner coal production systems [PhD dissertation]. Southern Illinois
University-Carbondale; 2012.
[7] Infomine USA Inc. Mine and mill equipment costs. Spokane Valley, WA: Infomine USA
Inc.; 2013.
[8] Haessler RW. One-dimensional cutting stock problems and solution procedures. Math
Comput Model 1992;16(1):1–8.
[9] Awuah-Offei K, Osei B, Askari-Nasab H. Modeling truck/shovel energy efficiency under
uncertainty. Trans Soc Min Metall Explor 2011;330:573–84.
[10] Kelton WD, Sadowski RP, Swets NB. Simulation with arena. 5th ed. New York, NY:
McGraw-Hill; 2009.
[11] Suliman SMA. Pattern generating procedure for the cutting stock problem. Int J Prod Econ
2001;74:293–301.
[12] Mitchell JE. Branch and cut. In: Encyclopedia of operations research and management sci-
ence. John Wiley & Sons, Inc.; 2011. p. 1–20. https://doi.org/10.1002/9780470400531.
eorms0117.
[13] Haessler RW, Sweeney PE. Cutting stock problems and solution procedures. Eur J Oper
Res 1991;54:141–50.
[14] Vanderbeck F. Decomposition in integer programming on Dantzig-Wolfe in a branch-and-
price branching and ways to perform algorithm. Oper Res 2000;48(1):111–28. https://doi.
org/10.1287/opre.48.1.111.12453.