Page 394 - Air and Gas Drilling Manual

Chapter 8: Air, Gas, and Unstable Foam Drilling 8-77
7. Machado, C. J, and Ikoku, C. U., “Experimental Determination of Solids
Fraction and Minimum Volumetric Requirements in Air and Gas Drilling,”
Journal of Petroleum Technology, November 1982.
8. Mitchell, R. F., “Simulation of Air and Mist Drilling for Geothermal Wells.”
Journal of Petroleum Technology, November 1983.
9. Tian, S. and Adewumi, M. A., “Development of Hydrodynamic-Model-Based
Air-Drilling Design Procedures”, SPE Drilling Engineering, December 1992.
10. Marcus, R. D., Leung, L. S., Klinzing, G. E., and Rizk, F., Pneumatic
Conveying of Solids, Chapman and Hall, 1990.
11. Lyons, W. C., Miska, S., and Johnson, P. W., "Downhole Pneumatic Turbine Motor:
Testing and Simulation Results," SPE Drilling Engineering, September 1990.

12. Daugherty, R. L., Franzini, J. B., and Finnemore, E. J., Fluid Mechanics with
Engineering Applications, Eighth Edition, McGraw-Hill, 1985.
13. API Recommended Practice for Testing Foam Agents for Mist Drilling, API
RP-46, First Edition, November 1966.
14. Handbook of Chemistry, McGraw-Hill, 1956.

15. Miska, S., “Should We Consider Air Humidity in Air Drilling Operations,”
Drill Bit, July 1984.
16. Scott, S. L., Wu, Y., and Bridges, T. J., “Air Foam Improves Efficiency of
Completion and Workover Operations in Low-Pressure Gas Wells,” SPEDC,
December 1995.
17. Hutchinson, S. O., “Stable Foam Lowers Production, Drilling and Remedial
Costs,” 17th Annual Southwestern Petroleum Short Course, April 1970.

18. Kitsios, E., Kamphuis, H., Quaresma, V., Rovig, J. W., and Reynolds, E.,
“Underbalanced Drilling Through Oil Production Zones with Stable Foam in
Oman,” IADC/SPE 27525, Presented at the 1994 IADC/SPE Drilling Conference,
Dallas, Texas, February 15-18, 1994.
19. U.S. Bureau of Mines Report Investigations No. 3798.

20. Coward, H. F., and Jones, G. W., “Limits of Flammability of Gases and
Vapors,” Bureau of Mines Bullitin 503, Washington 1952.
21. Allan, P. D., “Nitrogen Drilling System for Gas Drilling Applications,” SPE
28320, Presented at the SPE 69th Annual Technical Conference and Exhibition,
New Orleans, Louisiana, 25-28 September 1994.