Page 280 - Applied Photovoltaics

x E927-04a Standard specification for solar simulation for terrestrial
photovoltaic testing.
x E941-83(1999) Standard test method for calibration of reference
pyranometers with axis tilted by the shading method.
x E948-95 (2001) Standard test method for electrical performance of
photovoltaic cells using reference cells under simulated sunlight.
x E971-88 (1996)e1 Standard practice for calculation of photometric
transmittance and reflectance of materials to solar radiation.
x E972-96 (2002) Standard test method for solar photometric transmittance of
sheet materials using sunlight.
x E973-02 Standard test method for determination of the spectral mismatch
parameter between a photovoltaic device and a photovoltaic reference cell.
x E973M-96 Standard test method for determination of the spectral mismatch
parameter between a photovoltaic device and a photovoltaic reference cell
[Metric].
x G130-95(2002) Standard test method for calibration of narrow- and broad-
band ultraviolet radiometers using a spectroradiometer.
x G138-03 Standard test method for calibration of a spectroradiometer using a
standard source of irradiance.
x G159-98 Standard tables for references solar spectral irradiance at air mass
1.5: Direct normal and hemispherical for a 37° tilted surface.
x G167-00 Standard test method for calibration of a pyranometer using a
pyrheliometer.
x G173-03 Standard tables for reference solar spectral irradiances: Direct
normal and hemispherical on 37° tilted surface.
x G177-03 Standard tables for reference solar ultraviolet spectral distributions:
hemispherical on 37° tilted surface.
x WK3436 Standard test method for hot spot testing of photovoltaic modules.
x WK558 Reference solar spectral irradiances: Direct normal and hemispherical
on 37° tilted surface.

E.2 AUSTRALIA—STANDARDS AUSTRALIA
x AS/NZS 1170.2:2002 Structural design actions—Wind actions.
x AS/NZS 1170.2 Supp 1:2002 Structural design actions—Wind actions—
Commentary (Supplement to AS/NZS 1170.2:2002).
x AS 4086.2-1997 Secondary batteries for use with stand-alone power
systems—Installation and maintenance.
x AS 4509.1-1999 Stand-alone power systems—Safety requirements. (1999,
first amendment 2000).
x AS 4509.2-2002 Stand-alone power systems—System design guidelines
(2002).
x AS 4509.3-1999 Stand-alone power systems—Installation and maintenance
(1999, first amendment 2000).
x AS 4777.1-2005 Grid connection of energy systems via inverters—
Installation requirements.

267