Page 87 - Buried Pipe Design

External Loads 63

References
1. Autopipe Pipe Stress Analysis [software manual], App. D. Walnut Creek, Calif.:
Rebis, 1999.
2. American Iron and Steel Institute. 1971. Handbook of Steel Drainage and Highway
Construction Products, 5th ed. Chicago.
3. American Railway Engineering Association. Manual of Recommended Practice, REA
Spec 1-4-28. Chicago.
4. American Society of Civil Engineers. 1984. Guidelines for the Seismic Design of Oil
and Gas Pipeline Systems. New York.
5. American Society of Civil Engineers. 1984. Structural Analysis and Design of
Nuclear Plant Facilities.
6. American Society of Civil Engineers and Water Pollution Control Federation. 1982.
Gravity Sanitary Sewer Design and Construction. New York.
7. American Water Works Association. Thickness Design of Ductile Iron Pipe, AWWA
C150-96. Denver.
8. Antaki, G. A. 1997. A Review of Methods for the Analysis of Buried Pressure Piping.
Welding Research Council Bulletin 425. New York.
9. Bandyopadhyay, K., et al. 1995. Seismic Design and Evaluation Guidelines for the
Department of Energy High-Level Waste Storage Tanks and Appurtenances, BNL-
52361.
10. Federal Emergency Management Agency. 1992. Earthquake Resistant Construction
of Gas and Liquid Fuel Pipeline Systems Serving, or Regulated by, the Federal
Government, FEMA-233. Washington, D.C.
11. Goodling, E. C. 1983. Buried Piping—An Analysis Procedure Update. ASME PVP.
12. Hall, W. J., and N. M. Newmark. 1977. Seismic Design Criteria for Pipelines
Facilities. In Proceedings of the Conference on the Current State of Knowledge of
Lifeline Earthquake Engineering. American Society of Civil Engineers. New York.
13. Honegger, D. G. 1997. Evaluating Pipeline Performance for Earthquake Induced
Lateral Spread Ground Movement. ASME PVP.
14. ISO/DIS 13623, draft, 1998.
15. Marston, Anson, and A. O. Anderson. 1913. The Theory of Loads on Pipes in Ditches
and Tests of Cement and Clay Drain Tile and Sewer Pipe. Bulletin 31. Ames: Iowa
Engineering Experiment Station.
16. Moser, A. P., R. K. Watkins, and O. K. Shupe. 1976. Design and Performance of PVC
Pipes Subjected to External Soil Pressure. Logan: Buried Structures Laboratory,
Utah State University.
17. Newmark, N. M. 1942. Influence Charts for Computation of Stresses in Elastic
Foundations. Bulletin 338. University of Illinois: Engineering Experiment Station.
18. O’Rourke, M. J., and J. Liu. 1998. Seismic Loading Behavior of Buried Pipelines.
ASME PVP.
19. Piping Systems Institute. 1980. Course Notebook. Logan: Utah State University.
20. Reissner, E. 1959. On Final Bending of Pressurized Tubes. Journal of Applied
Mechanics (Trans. ASME). September, pp. 386–392.
21. Schlick, W. J. 1932. Loads on Pipe in Wide Ditches. Bulletin 108. Iowa State
Engineering Experiment Station.
22. Spangler, M. G. 1941. The Structural Design of Flexible Pipe Culverts. Bulletin 153.
Ames: Iowa Engineering Experiment Station.
23. Spangler, M. G., and R. L. Handy. 1982. Soil Engineering, 4th ed., New York: Harper
& Row.
24. Stephens, D. R., et al. 1991. Pipeline Monitoring—Limit State Criteria, Batelle
Report NG-18 no. 188 for AGA.
25. Terzaghi, K., and R. B. Beck. 1967. Soil Mechanics in Engineering Practice. Wiley.
26. Uni-Bell PVC Pipe Association. 1982. Handbook of PVC Pipe Design and
Construction. Dallas.
27. Watkins, R. K., and L. R. Anderson. 2000. Structural Mechanics of Buried Pipes.
New York: CRC Press.
28. Watkins, R. K., and A. P. Moser. 1971. Response of Corrugated Steel Pipe to External
Soil Pressures. Highway Research Record, 373:88–112.
29. Watkins, R. K., and A. P. Moser. 1998. Soil and Surface Loads on Buried Pipes
Including Minimum Cover Requirements. ASME PVP, 360.