Page 150 - CNC Robotics
P. 150
--- -------- - - - - _.. -- - - --
Chapter 6 / The Frame
Assembly
Put the pieces in place and make sure the two rail supports are
parallel and sq uare to each other. Butt the ends aga inst a straight
edge to save a little time.
Hold a large square, as in Figu re 6.12, to check that the ends are
square.
Figure 6.12
Large square at work.
Using a good tape measure, check the distance between the pieces
at either end, making sure they are parallel (see Figu re 6.13).
Figure 6.13
Making beams parallel.
141
