Page 186 - CNC Robotics
P. 186
Chapter 8 / The Z and Y Axes
The assembly came w ith a small swiveling tray attached to the
sheet metal spannin g the glides. I first drilled the rivet out of the
center of th e tab le (see Figure 8.3).
Figure 8.3
Drilling out the table's
rivet.
Because the y-s lide was 5 inches w ide inside the outer ridg es (see
Figure 8.4), I needed to cut 4-3/ 4 inches from the center of the
sheet metal ho lding the slides togeth er (see Figure 8.5).
Figure 8.4
Inside dimension of
y-slide from NuArc
copycamera.
177
