Page 287 - Distillation theory

P1: JPJ/FFX P2: JMT/FFX QC: FCH/FFX T1: FCH
0521820928c07 CB644-Petlyuk-v1 June 11, 2004 20:18

References 261

Glinos,K.,&Malone,M.F.(1985).MinimumVaporFlowsinaDistillationColumn
with a Side Stream – Stripper. Ind. Eng. Chem. Process Des. Dev., 24, 1087–
90.
Hengstebeck, R. J. (1961). Distillation: Principles and Design Procedures. New
York: Reinhold Publishing, pp. 147–9.
Julka, V., & Doherty, M. F. (1990). Geometric Behavior and Minimum Flows for
Nonideal Multicomponent Distillation. Chem. Eng. Sci., 45, 1801–22.
Knapp, J. P., & Doherty, M. F. (1990). Thermal Integration of Homogeneous
Azeotropic Distillation Sequences. AIChE J., 36, 969–84.
Knapp, J. P., & Doherty, M. F. (1992). A New Pressure-Swing Distillation Process
for Separating Homogeneous Azeotropic Mixtures. Ind. Eng. Chem. Res., 31,
346–57.
Knapp, J. P., & Doherty, M. F. (1994). Minimum Entrainer Flows for Extractive
Distillation: A Bifurcation Theoretic Approach. AIChE J., 40, 243–68.
Knight, J. R., & Doherty, M. F. (1989). Optimal Design and Synthesis of Homo-
geneous Azeotropic Distillation Sequences. Ind. Eng. Chem. Res., 28, 564–72.
Levy, S. G., & Doherty, M. F. (1986). Design and Synthesis of Homogeneous
Azeotropic Distillation. 4. Minimum Reflux Calculations for Multiple Feed
Columns. Ind. Eng. Chem. Fundam., 25, 269–79.
Lewis,W.K.,&Matheson,G.L.(1932).StudiesinDistillationDesignofRectifying
Columns for Natural and Refinery Gasoline. Ind. Eng. Chem., 24(5), 494–498.
Liebmann, K., Dhole, V. R., & Jobson, M. (1998). Integrated Design of a Conven-
tional Crude Oil Distillation Tower Using Pinch Analysis. Trans IChemE, 76,
Part A, 335–47.
Nelson, W. L. (1936). Petroleum Refinery Engineering. New York: McGraw-Hill.
Nikolaides, J. P., & Malone, M. F. (1987). Approximate Design of Multiple
Feed/Side-Stream Distillation Systems. Ind. Eng. Chem. Res., 26, 1839–45.
Packie, J. W. (1941). Distillation Equipment in the Oil Refining Industry. AIChE
Trans., 27, 51–8.
Petlyuk, F. B. (1984). Necessary Condition of Disappearance of Components at
Distillation of Azeotropic Mixtures in Simple and Complex Columns. In The
Calculation Researches of Separation for Refining and Chemical Industry (pp.
3–22). Moscow: Zniiteneftechim (Rus.).
Petlyuk, F. B., & Danilov, R. Yu. (1999). Sharp Distillation of Azeotropic Mixtures
in a Two-Feed Column. Theor. Found. Chem. Eng., 33, 233–42.
Petlyuk, F. B., & Danilov, R. Yu. (2001a). Few-Step Iterative Methods for Distilla-
tion Process Design Using the Trajectory Bundle Theory: Algorithm Structure.
Theor. Found. Chem. Eng., 35, 224–36.
Petlyuk,F.B.,&Danilov,R.Yu.(2001b).TheoryofDistillationTrajectoryBundles
and its Application to the Optimal Design of Separation Units: Distillation
Trajectory Bundles at Finite Reflux. Trans IChemE, 79, Part A, 733–46.
Pham, H. N., & Doherty, M. F. (1990a). Design and Synthesis of Azeotropic Dis-
tillation: I. Heterogeneous Phase Diagram. Chem. Eng. Sci., 45, 1823–36.
Pham, H. N., & Doherty, M. F. (1990b). Design and Synthesis of Azeotropic Dis-
tillation: II. Residue Curve Maps. Chem. Eng. Sci., 45, 1837–43.
Pham, H. N., & Doherty, M. F. (1990c). Design and Synthesis of Azeotropic Dis-
tillation: III. Column Sequences. Chem. Eng. Sci., 45, 1845–54.
Rooks, R. E., Malone, M. F., & Doherty, M. F. (1996). Geometric Design Method
for Side-Stream Distillation Columns. Ind. Eng. Chem. Res., 35, 3653–64.