Page 700 - Dust Explosions in the Process Industries

Research and Development 667

Medvedev, S. P.,A. N. Polenov, and B. E. Gelfand. (AugusUSeptember1994b)“On the Amplification
of Blast Wave Transmitted through a Dust Deposit.” Proceedings of the Sixth International
Colloquiumon Dust Explosions, ed. Deng Xufan and Piotr Wolanski, Shenyang,Peoples Republic
of China. pp. 297-301.
Mercer, D. B., P. R. Amyotte, D. J. Dupuis, et al. (September 1998) “The Measurementof Pre-Ignition
Turbulence during Dust Explosion Testing.” Proceedings of the Eighth International Colloquium
on Dust Explosions, Schaumburg,IL. Schaumburg: Safety Consulting Engineers, pp. 37-57.
Mercer, D. B., P. R. Amyotte,D. J. Dupuis, et al. (2001) “The Influenceof Injector Design on the Decay
of Pre-Ignition Turbulence in a Spherical Explosion Chamber.” Journal of Loss Prevention in the
Process Industry 14, pp. 269-282.
Mercx, W. P. M. (February 1992) “Critical Appraisal of Damage Criteria for Buildings and Process
Equipment.” Proceedings of the First World Seminar on the Explosion Phenomenon and on the
Application of Explosion Protection Techniques in Practice. Arranged by EuropEx, Brussels.
Michefis,J. (June 1996)“Large-ScaleExperimentswith CoalDust Explosionsin Connectionwith Road
T-Junction.” Proceedings of the Seventh International Colloquium on Dust Explosions, Bergen,
Norway. Bergen: GexCon AS (previously CMR).
Mintz. K. J. (1993) “Upper Explosive Limit of Dusts: ExperimentalEvidence for Its Existence under
Certain Circumstances.” Combustion and Flame 34, pp. 125-130.
Mintz, K. J. (1995) “Problems in Experimental Measurements of Dust Explosions.” Journal oj
Hazardous Materials 42, pp. 177-186.
Mintz, K. J., M. J. Bray, D. J. Zuliani, et al. (1996) “Inerting of Fine Metallic Powders.” Special issue
on dust explosions,ed. P. R. Amyotte. Journal of Loss Prevention in the Process Industry 9, pp. 77-80.
Mitgau, P. (1996) EinJEuss der Turbulenzlunge und der Schwankungsgeschwindichkeit auf die
Verr?rennutzgsgeschwindigkeitvon aerosolen. Bericht 1411996. Gottingen, Germany: Max-Planck-
Institut fur Stromungsforschung.
Mitgau, P.,€3. 6.Wagner, and R. Klemens. (1997) “Einfluss der Turbulenzlange und der
Schwankungsgeschwindichkeitauf die Flammengeschwindigkeitvon Stauben.”Feuerungstechnik,
Kaleidoskop aus aktueller Forschung und Entwicklung. Festschrift an Pro$ Wolfgang Leuckel zu
seinem 65. Geburtstag. Karlsruhe, Germany: Engler-Bunte-Institut, Bereich Feuerungstechnik,
Universitat Karlsruhe, pp. 17-45.
Mittal, M. (Apd 1993) “Mathematical Models for Minimum Explosible Concentration of Dusts.”
Proceedings of the Fifth International Colloquium on Dust Explosions, Pultusk, Poland,
pp. 247-256.
Mittal,M. (August/September 1994)“Dust Explosion RiskAnalysis of PneumaticTransport Systems.”
Proceedings of the Sixth International Colloquium on Dust Explosions, ed. Deng Xufan and Piotr
Wolanski, Shenyang, Peoples Republic of China, pp. 381-390.
Mniszewski, K. R. (September 1998) “PracticalAnalytical Techniques for Explosion Investigation.”
Proceedings of the Eighth International Colloquium on Dust Explosions, Schaumburg, IL.
Schaurnburg: Safety Consulting Engineers, pp. 284295.
ken, I. O., J. R. S. Lee, B. H. Hjertager, et al. (1982) “Pressure Development Due to Turbulent Flame
Propagation in Large-Scale MethaneIAir Explosions.” Combustion and Flame 47, pp. 3 1-52.
Mdkov, V. V., V. M. Nikitenko, A. V. Filippov, et al. (October 1993) “Dynamics of Gas Explosion in
a Vented Vessel with Inertial Vent Covers.” Proceedings of the Joint Meeting of the Russian and
Japanese Sections of the CombustionInstitute, Chemogolovka, Moscow Region, pp. 183-185.
Moore, P. E. (February 1992a)“Explosion Suppressionfor Protecting Systems against the Explosion
Hazard Presented by PneumaticFilling Techniques.” Proceedingsof the First World Seminaron the
Explosion Phenomenon and on the Application of Explosion Protection Techniques in Practice.
Arranged by EuropEx, Brussels.
Moore, P. E. (l992b) “Developmentsin Explosion Suppression.”European Summer School on Dust
Explosion Hazards: Their Assessment and Control, Cambridge, UK. Organized by IBC Technical
Services Ltd. in association with BMHB and IELG.