Page 642 - Handbook of Thermal Analysis of Construction Materials

608 Chapter 14 - Sealants and Adhesives

25. Riesen, R., and Bartels, W., Rapid Quantitative Characterization of Elastomers
by Dynamic Load Thermomechanical Analysis, in: Proc. 7th Int. Conf. on
Thermal Analysis, 2:1050–1056, John Wiley & Sons, NY (1982)
26. Squire, R., Chemical Changes in Roof Membranes and Building Sealants
Building Research Establishment Occasional Paper, OP 60, pp. 29–48,
Bldg. Res. Establishment, Garston, UK (1995)
27. Rama Rao, M., and Radhakrishnan, T. S., Thermal Degradation of Liquid
Polysulfide Polymers: Pyrolisis-GC-MS and Thermogravimetry Studies, J.
Appl. Polymer Sci., 30:855–873 (1985)
28. Radhakrishnan, T. S., and Rama Rao, M., Kinetics and Mechanism of the
Thermal Degradation of Polysulfide Polymer Cured with Ammonium
Dichromate/Pyrolysis-Gas Chromatography and Thermogravimetric
Studies, J. Anal. Appl. Pyrolysis, 9:309–322 (1986)
29. Boettger, T., and Bolte, H., Results from the University of Leipzig Project
Concerning the Long-Term Stability of Elastomeric Building Sealants, in
Science and Technology of Building Seals, Sealants, Glazing, and
Waterproofing, (J. M. Klosowski, ed.), 7:66–80, ASTM STP 1334, ASTM,
West Conshohocken, PA (1998)
30. Feldman, D., and Lacasse, M. A., Morphology of Lignin-polyurethane
Blends, Mater. Res. Soc. Symp. Proc., 153:193–198 (1989)
31. Rohn, C. L., Flow Behavior of Holt Melt Adhesives, Thermal Trends,
3(1):18 (Winter 1996)
32. Brummer, R., Hetzel, F., Harder, C., and Germany, H., Correlation of
Polymer Properties with Dynamic Mechanical Measurements, Appl.
Rheology, 7(4):173–178 (1997)
33. Foster, B. W., and Barrret, A. E., Characterizing Hot-tack Difference in
Hot-melt Adhesives Using DTMA, Tappi Journal, 74(9):135–138 (1991)
34. Onic, L., Bucur, V., Ansell, M. P., Pizzi, A., Deglise, X., and Merlin, A.,
Dynamic Thermomechanical Analysis as a Control Technique for Thermoset
Bonding of Wood Joints, J. Int. Adhesion & Adhesives, 18:89–94 (1998)
35. Brinson, H. F., Dickie, R. A., and Debolt, M. A., Measurement of Adhesive
Bond Properties Including Damage by Dynamic Thermal Analysis of a
Beam Specimen, J. Adhesion, 55:17–30 (1995)
36. Tabaddor, P. L., Aloisio, C. J., Bair, H. E., Plagianis, C. H., and Taylor, C.
R., Thermal Analysis Characterization of a Commercial Thermoplastic/
Thermoset Adhesive, J. Thermal Anal. Calorimetry, 59:559–570 (2000)
37. Ludbrook, B. D., and Whitwood, R. J., The Use of Thermal Analysis to
Investigate the Cure of Reactive Adhesives, Int. J. Adhesion Adhesives,
12(3):138–144 (1992)