Page 86 - Materials Chemistry, Second Edition

Life cycle assessment and waste management

ABS (2006) 4613.0 Australia’s Environment Issues and Trends 2006. Australian Bureau of 73
Statistics, Commonwealth of Australia, Canberra.
ABS (2007) 1301.0 – Year Book Australia. Australian Bureau of Statistics, Commonwealth of
Australia, Canberra.
Beccali G, Cellura M and Mistretta M (2001) Managing municipal solid waste: energetic and
environmental comparison among different management options. International Journal
of Life Cycle Assessment 6(4), 243–249.
Brunt JV (2001) Dampier Nitrogen Project. Retrieved 25 May 2004 from <http://www.plentyr.
com.au/>.
ESAA (2002) Electricity Australia 2002. Electricity Supply Association of Australia, Melbourne.
Grant T, James K, Dimova C, Sonneveld K, Tabor A and Lundie S (1999) ‘Stage 1 report for life
cycle assessment of packaging waste management in Victoria.’ Stage 1 of the National
Project on Life Cycle Assessment of Waste Management Systems for Domestic Paper and
Packaging. Report to EcoRecycle Victoria, Melbourne. Centre for Design at RMIT
University, the Centre for Packaging Transportation and Storage at Victoria University (as
part of the CRC for International Food Manufacture and Packaging Science) and the
Centre for Water and Waste Technology at the University of New South Wales (as part of
the CRC for Waste Management and Pollution Control), Melbourne and Sydney.
Grant T, James K, Lundie S and Sonneveld K (2001) ‘Stage 2 report for life cycle assessment for
paper and packaging waste management scenarios in Victoria.’ Report to EcoRecycle
Victoria, Melbourne. Centre for Design at RMIT University, Centre for Packaging
Transportation and Storage at Victoria University and the Centre for Water and Waste
Technology at University of New South Wales, Melbourne and Sydney.
Grant T, James K and Partl H (2003) ‘Life cycle assessment of waste and resource recovery
options (including energy from waste).’ Report to EcoRecycle Victoria. Centre for Design
at RMIT University and Nolan-ITU Pty Ltd, Melbourne.
Guinee JBFE, Gorree M, Heijungs R, Huppes G, Kleijn R, de Koning A, van Oers L, Wegener
Sleeswijk A, Suh S, Udo de Haes HA, de Bruijn D, van Duin R, Huijbregts M, Lindeijer E,
Roorda AAH, van der Ven BL and Weidema BP (2001) Life Cycle Assessment. An
Operational Guide to the ISO Standards. Ministry of Housing, Spatial Planning and the
Environment (VROM) and Centre for Environmental Science, Leiden University (CML),
The Netherlands.
Hall W (2003) Personal communication between Warwick Hall, Plastral Fidene (agents for
Mater-Bi) and John Schiers of ExcelPlas Australia.
Hamilton C (2003) Growth Fetish. Allen and Unwin, Crows Nest, Sydney.
Huijbregts M and Lundie S (2002) ‘Australian life cycle impact assessment of toxic emissions.’
Department of Environmental Studies, Nijmegen University (The Netherlands) and
Centre for Water and Waste Technology, UNSW (Australia).
ICF (1997) ‘Greenhouse gas emissions from municipal waste management – draft working
paper.’ Prepared for Office of Solid Waste and Office of Policy, Planning and Evaluation,
US Environmental Protection Agency, Washington DC.
Imhoff D (2005) Paper or Plastic. Searching for Solutions to an Overpackaged World. Sierra Club
Books, San Francisco.
James K, Grant T and Sonneveld K (2002) Stakeholder involvement in Australian paper and
packaging waste management LCA study. International Journal of Life Cycle Assessment
7(3), 151–157.
McGregor Tan Research (2007) ‘Keep Australia Beautiful National Litter Index, Annual Report
2006/2007.’ Frewville, South Australia.

100804•Life Cycle Assessment 5pp.indd 73 17/02/09 12:46:18 PM