Page 49 - Making PIC Microcontroller Instruments and Controllers

3A flIE SOFTWANE. IE COIIIPILEFS, AI{D IHE ED|ION

CLEARWDT Clear (tickle) watchdog timer.
COUNT Count number of pulses on a pin.

DATA Define initial contents of on-chip EEPROM.
DEBUG Asynchronous seflal output to fixed pin and baud.
DEBUGIN Asynchronous serial input from fixed pin and baud.

DISABLE Disable ON DEBUG and ON INTERRLIPTFocessing.
DISABLEDEBUG Disable ON DEBUG processilg.
DISABLE INTERRUPI Disable ON INTERRUPI Focessing.

DTMFOI-IT Produce touch{ones on a pin.
EEPROM Define initial contents of on-chip EEPROM.
ENABLE Enable ONDEBUG and ONINTERRLlPTpocessing.
ENABLE DEBUG Enable ON DEBUG processing.

ENABLE INTERRUPI Enable ON INTERRUPT processing.
END Stop execution and enter low power mode.

ERASECODE Erase block oicode memoty.
FOR..NEXT Repeatedly execute statements.
FREQOUT Produce up to two frequencies on a pin.
GOSUB Call BASIC subrouti e at specified label.

GOTO Continue execution at specified label.
HIGH Make pin outpot high.
IIPWM Output hardwarc pulse width modulated pulse train.

HSERIN Hardware asynchronous serial input.
HSERIN2 Hardware asynchronous serial input, second port.
HSEROUT Hatrdwarc asynchonous serial output.

HSEROUT2 Hardware asynchronous serial output, second port.
I2CREAD Read from I2C device.
I2CWRIIE write to I2C devlce.

IR.THEN..ELSE..ENDIF Conditionallyexecutestatements.
INPUT MaIe pin aII input.
LCDIN Read from LCD RAM.