Page 7 - Mechanics Analysis Composite Materials
P. 7

ELSEVIER SCIENCE Ltd
           The Boulevard, Langford Lane
           Kidlington, Oxford OX5 lGB, UK
           @  2001 Elsevier Science Ltd.  All rights reserved.

           This work is protected under copyright by Elsevier Science, and the following terms and conditions apply to its use:
           Photocopying:
           Single photocopies of single chapters may be made for personal usc i15 allowed by national copyright laws. Permission of the Publisher and
           payment  of a fee is required for all other photocopying,  including multiple or systemiltic copying. copying for adverlising or promotional
           purposes, resale. and all forms of document delivery. Special rates arc available for educational institutions that wish to make photocopies for
           non-prnfit educational classroom use.
           Permissions may be sought directly from Elsevier Science Global Rights Department, PoBox 800,Oxford OX5 IDX.UK phonc: (4)1865
           843830. fax: (4)1865 853333, e-mail: permissionsgelsevier.co.uk.You may also contact Global Rights directly through Elsevier's  home
           page (http://www.el.wvier.nl),  by  sclccting 'Obtaining  Permissions'.
           In the USA, users may clear permissions and make payments through the Copyright Clearance Center. Inc..  222 Rosewmd Drive, Dan\*ers.
           MAOIYU, USA; phonc: (+1)(978) 7508400. fax: (+1)(978)7504744,and in the UK through thecopyright Licensing Agency Rapidclearance
           Service (CLARCS). 90Tottenham Court Road. London W IP 0LP. UK:  phone: (44) 207 63 I  5555: fax: (44) 207 63 I  5500. Other countries
           may have a local reprographic rights agency for payments.
           Derivative Works:
           Tables of contents may be reproduced for internal circulution. but permission of Elsevier Science is requircd for external resale or distribution
           of such material. Permission of thc Publisher is required for all other dcrivative works. including compilations and translations.
           Electronic Storage or Usage:
           Permission of the Publisher is required to storc or use electronically  any material contained  in this work, including any chapter or pan of a
           chapter.
           Except as outlined above, no part of this work may  be rcproduced, stored in a retrieval systcni or transmitted in any form or by any means.
           electronic,  mechanical, photocopying, recording or otherwise. without prior written permission of the Publisher.
           Addrcss permissions requests to: Elsevier Science Global Rights Department. at the mail. fax and e-mail addresses noted above.
           Noticc:
           No responsibility is assumed by the Publisher for any injury and/or damage to persons or property as a matter of products liability. negligence
           or otherwise, or from any use or operation of any methods, products. instructions or ideas contained in the material hercin. Because of npid
           advances in the medical sciences. in particular, independent verification of diagnoses and drug dosages should be made.
           First edition  2001
           ISBN: 0-08-042702-2
           British Library Cataloguing in Publication Data
           Vasiliev, Valery V.
              Mechanics and analysis of composite materials
              1 Composite materials - Mechanical properlieq
           I.Tit1e II.Morozov, Evgeny V.
           620.1 '1892
           ISBN 0OX0427022
           Library ofCongress Cataloging-in-Publication Data
           Vasiliev, Valery V.
               Mechanics and analysis of composite materials / Valery V.  Vasiliev, Evgeny V.
             Morozov. -- 1st ed.
                p.  cm.
               Includes bibliographical references and index.
               ISBN 0-08-042702-2 (hardcover)
                I.Composite materials--Mechanical Properties. 2. Fibrous comp~~sites--Mechanical
             properties. 1. Mornzov. Evgeny V. 11.  Title.
             TA418.9.C6V375 2(WW
             62O.l'1892--dc21                            (W)-06  176.5

           GI The paper used in this publication meets the requirements of ANSVNISO 239.48-1992 (Permanence of Paper).

           Printed in The Netherlands
   2   3   4   5   6   7   8   9   10   11   12