Page 246 -

References 237
4.2 Sato S, Ishigure M, Inaba H (1991) Optical trapping and rotational
manipulation of microscopic particles and biological cells using high-
order mode Nd:YAG laser beams. Electron Lett 27:1831–1832
4.3 Higurashi E, Ukita H, Tanaka H, Ohguchi O (1994) Optically induced
rotation of micro-objects fabricated by surface micromachining. Appl
Phy Lett 64:2209–2210
4.4 Yamamoto A, Yamaguchi I (1995) Measurement and control of opti-
cally induced rotation of anisotropic shaped particles. Jpn J Appl Phys
34:3104–3108
4.5 Gauthier RC (1995) Ray optics model and numerical computation for
the radiation pressure micromotor. Appl Phy Lett 67:2269–2271
4.6 Ukita H, Nagatomi K (1997) Theoretical demonstration of a micro-
rotator driven by optical pressure on the light incident surface. Opt
Rev 4:447–449 / Ukita H and Nagatomi K (2003) Optical tweezers and
fluid characteristics of an optical rotor with slopes on the surface upon
which light is incident and a cylindrical body. Appl Opt 42:2708–2715
4.7 Luo ZP, Sun YL, An KN (2000) An optical spin micromotor. Appl Phy
Lett 76:1779–1781
4.8 Gauthier RC, Tait RN, Mende H, Pawlowicz C (2001) Optical selec-
tion manipulation trappingand activation of a microgear structure
for application in micro-optical-electromechanical systems. Appl Opt
40:930–937
4.9 Friese MEJ, Dunlop HR (2001) Optically driven micromachine ele-
ments. Appl Phy Lett 78:547–549
4.10 Galajda P, Ormos P (2001) Complex micromachines produced and
driven by light. Appl Phy Lett 78:249–251
4.11 Larsen UD, RongW, Telleman P (1999) Design of rapid micromixers
usingCFD. Transducers’99, Sendai Japan: 200–203
4.12 Nagumo K, Ogami Y, Nagatomi K, Ukita H (2000) Investigation on
mixingperformance by a shuttlecock optical micro-rotor. Proc Int
Symp Transport Phenomena and Dynamics of RotatingMachinery
ISROMAC-8, Hawaii USA: 452–457
4.13 Ogami Y, Nishikawa K, Ukita H (2005) Study on the mixing per-
formance of a microoptical rotor by CFD. Trans Jpn Soc Mech Eng
71:2434–2441 (in Japanese)
4.14 Katsuhara T, Ued Y, Miyazak D, Matsushita K, Yamada K, Yotsuya
T (2001) Micro-rotators fabricated by photolithography. Proc SPIE
4440:277–284
4.15 Akagi D, Takada K, Ukita H (2005) Fabrication of three-wing mixers
and their application to liquid mixingin a microchannel. Trans Inst
Electr EngJpn MSS-05–30:51–56 (in Japanese)
4.16 Higurashi E, Sawada R, Ito T (1998) Optically induced rotation of
trapped microobjects about an axis perpendicular to the beam axis.
Appl Phys Lett 72:2951–2953
4.17 Galajda P, Ormos P (2000) Complex micromachines produced and
driven by light. Appl Phys Lett 78:249–251