Page 82 - MODELING OF ASPHALT CONCRETE

60 Cha pte r T w o

Monismith, C. L., “Fatigue Response of Asphalt-Aggregate Mixes,” Strategic Highway
Research Program, SHRP-A-404, National Research Council, 1994.
Mortazavi, M., and J. S. Moulthrop, The SHRP Materials Reference Library, SHRP-A-646
Report, The Strategic Highway Research Program, National Research Council,
Washington, D.C., 1993.
Neppe, S. L., “Durability of Asphaltic Bitumen as Related to Rheological Characteristics,”
Transaction, South African Institute of Civil Engineers, Vol. 2, 1952, p. 103.
Oliver, J. W. H., “Optimizing the Improvements Obtained by the Digestion of
Comminuted Scrap Rubbers in Paving Asphalts,” Proceedings of the Association of
Asphalt Paving Technologies, Vol. 51, 1982, p. 169.
Page, G. C., K. H. Murrphy, B. E. Ruth, and R. Roque, “Asphalt Binder Hardening—
Causes and Effects,”Proceedings of the Association of Asphalt Paving Technologists, Vol.
54, 1985, pp. 140–167.
Pell, P. S., and K. E. Cooper, “The Effect of Testing and Mix Variables on the Fatigue
Performance of Bituminous Materials,” Proceedings of the Association of Asphalt Paving
Technologists, Vol. 44 (1975), pp. 1–37.
Peterson, K., “Specific’s Guide to Asphalt Modifiers,” Roads and Bridges Magazine, May
1993, pp. 42–46.
Pfeiffer, J. Ph., and P. M. van Doormaal, “The Rheological Properties of Asphaltic
Bitumen,” Journal of Institute of Petroleum Technologists, Vol. 22, 1936, p. 414.
Pfeiffer, J. Ph., The Properties of Asphaltic Bitumen, Section II, Elsevier Publishing Co.,
Amsterdam, 1950.
Pink, H. S., R. E. Merz, and D. S. Bosniak, “Asphalt Rheology: Experimental Determination
of Dynamic Moduli at Low Temperature,” Proceedings of the Association of Asphalt Paving
Technologists, Vol. 49, 1980, p. 64.
Pronk, A. C., and P. C. Hopman, “Energy Dissipation: The Leading Factor of Fatigue,”
Proceedings of Strategic Highway Research Program: Sharing the Benefits, London, 1990.
Pronk, A. C., “Evaluation of the Dissipated Energy concept for the Interpretation of
Fatigue Measurements in the Crack Initiation Phase,” The Road and Hydraulic
Engineering Division (DWW), Netherlands, P-DWW-95-001, 1995.
Puzinauskas, V. P., ”Evaluation of Properties of Asphalt Cements with Emphasis on
Consistencies at Low Temperature,” Proceedings of the Association of Asphalt Paving
Technologists, Vol. 36, 1967, p. 489.
Puzinauskas, V. P., “Properties of Asphalt Cements,” Proceedings of the Association of
Asphalt Paving Technologists, Vol. 48, 1979, pp. 646–710.
Romberg, J. W., and R. N. Traxler, “Rheology of Asphalt,” Journal of Colloid Science,
Vol. 2, 1947, pp. 33–47.
Romine, R. A., M. Tahmoressi, R. D. Rowlett, and D. F. Martinez, “Survey of State
Highway Authorities and Asphalt Modifier Manufacturers on Performance of
Asphalt Modifiers,” Transportation Research Record no. 1323, 1991, p. 61.
Saal, R. N. J., and J. W. A. Labout, “Rheological Properties of Asphalts,” in Rheology: Theory
and Applications, Vol. 2, 1958, F.R. Eirich, Ed., New York, Academic Press.
Schmidt, R. J., “Laboratory Measurement of the Durability of Paving Asphalts,” ASTM
SPT 532, 1973, pp. 79–99.
Serafin, P. J., L. L. Kole, and A.P. Chirtz, “Michigan Bituminous Experimental Road—
Final Report,” Proceedings of the Association of Asphalt Paving Technologists, Vol. 36,
1967, pp. 582–614.
Terrel, R. L., and I. A. Epps, Using Additives and Modifiers in Hot Mix Asphalt, QI Series
114, National Asphalt Pavement Association (NAPA), Riverdale, Md., 1989.