Page 144 - Modelling in Transport Phenomena A Conceptual Approach

124 CHAPTER 4. EVALUATION OF TRANSFER COEFFICIENTS

Lapple, C.E. and C.B. Shepherd, 1940, Calculation of particle trajectories, Ind.
Eng. Chem. 32, 605.

Linton, W.H. and T.K. Sherwood, 1950, Mass transfer from solid shapes to water
in streamline and turbulent flow, Chem. Eng. Prog. 46, 258.

Moody, L.F., 1944, Friction factors for pipe flow, Trans. ASME 66, 671.

Ram, W.E. and W.R. Marshall, 1952, Evaporation from drops - Part I, Chem.
Eng. Prog. 48, 141.

Sieder, E.N. and G.E. Tate, 1936, Heat transfer and pressure drop of liquids in
tubes, Ind. Eng. Chem. 28, 1429.

Steinberger, R.L. and R.E. Treybal, 1960, Mass transfer from a solid sphere to a
flowing liquid stream, AIChE Journal 6, 227.

Swamee, P.K. and A.K. Jain, 1976, Explicit equations for pipe-flow problems, J.
Hydr. Div. ASCE 102, 657.

Tosun, t. and 1. Aksahin, 1992, Explicit expressions for the friction factor, Un-
published report, Middle East Technical University.

Tosun, 1. and 1. Aksahin, 1993, Calculate critical piping parameters, Chem. Eng.,
100 (March), 165. For corrections see also Chem. Eng. 100 (July), 8.

Turton, R. and N.N. Clark, 1987, An explicit relationship to predict spherical
particle terminal velocity, Powder Technology 53, 127.

Turton, R. and 0. Levenspiel, 1986, A short note on the drag correlation for
spheres, Powder Technology 47, 83.

Whitaker, S., 1972, Forced convection heat transfer correlations for flow in pipes,
past flat plates, single cylinders, single spheres, and for flow in packed beds and
tube bundles,” AIChE Journal 18, 361.

Zhukauskas, A., 1972, Advances in Heat Transfer, Vol. 8: Heat Transfer From
Tubes in Cross Flow, Eds. J.P. Hartnett and T.F. Irvine, Jr., Academic Press,
New York.