Page 212 - Modular design for machine tools

172 Modular Design Guide and Machine Tools Description

15. Yokoyama, M., H. Shibuya, and R-K. Park, “A Basic Study of the Automated
Generation of Machine Structures” (2d Report, Generation Method of the Functional
Structure of Machine), Trans. of JSME, 1986, 52(473): 417–422.
16. Ito, Y., and H. Shinno, “Structural Description and Similarity Evaluation of the
Structural Configuration in Machine Tools,” Int. J. Mach. Tool Des. Res., 1982, 22(2):
97–110.
17. Maeda, J., K. Momose, and T. Sata, “A Proposal for Quantifying Parts Similarity,” J.
of JSPE, 1975, 41(12): 1147–1149.
18. Shinno, H., and Y. Ito, “Generating Method for Structural Configuration of Machine
Tools—1st Report, Method of Variant Design Type,” Trans. of JSME(C), 1984, 50(449):
213–221.
19. Shinno, H., and Y. Ito, “Computer Aided Concept Design for Structural Configuration
of Machine Tools—Variant Design Using Directed Graph,” Trans. of ASME J. of
Mechanisms, Transmissions and Automation in Design, 1987, 109: 372–376.
20. Lee, H. S., H. Shinno, and Y. Ito, “Structural Configuration Design of Machining
Center—On the Variant Method Using Conjunction Pattern,” J. of JSPE, 1986, 52(8):
1393–1398.
21. Iwata, K., N. Sugimura, and L. S. Peng, “A Study of the Fundamental Design of
Machine Structures for Machining,” Trans of JSME (C), 1990, 56(523): 803–809.
22. Shinno, H., and Y. Ito, “A Proposed Generating Method for the Structural
Configuration of Machine Tools,” ASME Paper 84, WA/Prod-22, 1984.
23. Huang, K. J., H. Shinno, and Y. Ito, “Design Methodology for FMC of Compact Type—
Spatial Allocation Approach with Functional and Structural Blocks,” in Proc. of 1st
Int. Conf. on Automation Technology, National Chiao Tung University, Taipei, 1990,
pp. 165–173.