Page 390 - Petrophysics 2E

358 PETROPHYSICS: RESERVOIR ROCK PROPERTIES

5. Adam, N. K. The Physics and Chemistry of Su?$aces, 3rd ed. Oxford
University Press, London, 1941, pp. 7-12.
6. Champion, M. A. and Davy, N. Properties of Matter, 3rd ed. Blackie & Sons,
London, 1960, pp. 115-118.
7. Moore, W. J. Pbysical Chemistry, 2nd ed. Prentice-Hall, Englewood Cliffs,
NJ, 1955, pp. 500-502.
8. Neumann, H. J. “Investigations on the Wettability of Formations and on Oil
Migration.” Erdoel- und Kohle-Erdgas-Petrochemie. Vol. 19, No. 3, 1966,
pp. 171-172.
9. Rose, W. and Bruce, W. A. “Evaluation of Capillary Character in Petroleum
Reservoir Rocks.” Trans. AZME, Vol. 186, 1949, pp. 127-141.
10. Carman, P. C. “Fluid Flow through Granular Beds.” Trans. Inst. Cbem. Eng.,
1937, pp. 150-166.
11. O’Meara, D. J., Jr., Hirasaki, G. J. and Rohan, J. A. “Centrifuge Measurements
of Capillary Pressure: Part 1-Outflow Boundary Condition.” SPE 18296,
63rd Annual Conf., Houston, TX, Oct. 2-5, 1988, 14 pp.
12. Wardlaw, N. C. and Taylor, R. P. “Mercury Capillary Pressure Curves and the
Interpretation of Pore Structure and Capillary Behavior in Reservoir Rocks.”
Bull. Can. Petrol. Geol., Vol. 24, No. 2, 1976, pp. 225-262.
13. Lorenz, P. B. “Notes on Capillary Pressure Curves.” Data obtained at
U.S. Bureau of Mines, Bartlesville Energy Technology Center, 1972 (not
previously published-used here with permission from P.B. Lorenz).
14. Slobod, R. L. and Blum, H. A. “Method for Determining Wettability of
Reservoir Rocks.” Trans. AIME, Vol. 195, 1952, pp. 1-4.
15. Slobod, R. L., Chambers, A. and Prehn, W. L., Jr. “Use of Centrifuge for
Determining Connate Water, Residual Oil and Capillary Pressure Curves of
Small Core Samples.” Trans. AIME, Vol. 192, 1951, pp. 127-134.
16. Donaldson, E. C., Kendall, R. F., Pavelka, E. A. and Crocker, M. E.
“Equipment and Procedures for Fluid Flow and Wettability Tests of
Geological Materials.” DOE/BETC/IC-79/5, Nat. Tech. Info. Sv., Springfield,
VA, 1980,40 pp.
17. Hassler, G. L. and Brunner, E. “Measurement of Capillary Pressures in Small
Core Samples.” Trans. AIME, Vol. 160, 1945, pp. 114-123.
18. Melrose, J. C. “Interpretation of Mixed Wettability States in Reservoir
Rocks.” SPE 10971, Annual Conf., New Orleans, Sept. 1982, pp. 26-29.
19. Melrose, J. C. “Interpretation of Centrifuge Capillary Pressure Data.” The
Log Anatyst, Vol. 29, No. 1, Jan.-Feb. 1988, pp. 40-47.
20. Donaldson, D., Ewall, N. and Singh, B. “Characteristics of Capillary Pressure
Curves.”J Petrol. ScL C Eng., Vol. 6, 1991, pp. 249-261.
21. Van Domselaar, H. R. ”An Exact Equation to Calculate Actual Saturations
from Centrifuge Capillary Pressure Measurement.” Rev. Tech. INTEVEP,
Vol. 4, NO. 1, 1984, pp. 55-62.