Page 49 - Pipelines and Risers
P. 49

22                                                                Chapter I

            1.6  References

            1.  Bai, Y.  and Damsleth, P.A.,  (1997) “Limit-state Based Design  of  Offshore Pipelines”,
               Proc. of om ’97.
            2.  Bai, Y.  and Song, R.,  (1997) “Fracture Assessment of  Dented Pipes with  Cracks and
              Reliability-based Calibration of  Safety Factors”, International Journal of Pressure Vessels
               and Piping, Vol. 74, pp. 221-229.
            3.  Bai, Y.,  Xu, T. and Bea, R., (1997) “Reliability-based Design & Requalification criteria
               for Longitudinally Corroded Pipelines”, Proc. of ISOPE ‘97.
            4.  Bai,  Y.  and  Damsleth, P.A.,  (1998) “Design  Through  Analysis  Applying  Limit-state
               Concepts  and  Reliability  Methods”,  Proc.  of  ISOPE’98.  A  plenary  presentation  at
               ISOPE’98.
            5.  Damsleth, P.A.,  Bai, Y., Nystrprm, P.R.  and Gustafsson, C.  (1999) “Deepwater Pipeline
               Installation with Plastic Strain”, Proc. of OMAE’99.
            6.  Hauch, S. and Bai, Y., (1998) “Use of Finite Element Methods for the Determination of
               Local Buckling Strength”, Proc. Of OMAE ‘98.
            7.  Kristiansen, N.@., Bai, Y.  and Damsleth, P.A., (1997) “Ratcheting of High Pressure High
              Temperature Pipelines”, Proc. Of OMAE ’97.
            8.  Kristiansen, N.@.,  Tprrnes,  K.,  Nystr~m, P.R.  and  Damsleth, P.A.,  (1998)  “Structural
               Modeling of  Multi-span Pipe Configurations Subjected to  Vortex Induced Vibrations”,
               Proc. of ISOPE’98.
            9.  Langford, G. and Kelly, P.G.,  (1990) “Design, Installation and Tie-in of Flowlines”, JPK
               Report  Job No. 4680.1.
            10. Nprdland,  S.,  Bai,  Y. and  Damsleth,  P.A.,  (1997)  “Reliability Approach  to  Optimize
               Corrosion  Allowance”,  Proc. of  Int.  Conf.  on  Risk  based  & Limit-state  Design  &
               Operation of Pipelines.
            11. Nprdland, S., Hovdan, H. and Bai, Y.,  (1997). “Use of  Reliability Methods to Assess the
               Benefit of Corrosion Allowance”, Proc. of EUROCORR’97, pp.47-54 (V01.2).
            12. Nystr0m P.,  Tprrnes K.,  Bai  Y.  and Damsleth  P.,  (1997). “Dynamic  Buckling and Cyclic
               Behavior of HPMT Pipelines”, Proc. of ISOPE97.
            13. Ose, B. A., Bai, Y., Nystrprm, P. R. and Damsleth, P. A.,  (1999) “A finite element model
               for In-situ Behavior of Offshore Pipelines on  Uneven  Seabed and its Application to On-
               Bottom Stability”, Proc. of ISOPE99.
            14. Reid, A.,  Grytten, T.I.  and Nystr@m, P.R.,  (2000) “Case Studies in  Pipeline Free Span
               Fatigue”, Proc. of ISOPE’2000.
            15. T0rnes, K.,  Nystr0m, P., Kristiansen, N.0.,  Bai, Y. and Damsleth, P.A.,  (1998) “Pipeline
               Structural Response to Fishing Gear Pullover Loads”, Proc. of ISOPE’98.
   44   45   46   47   48   49   50   51   52   53   54