Page 123 - Planning and Design of Airports

92 Airp o r t Pl anning

31. DC-9 Airplane Characteristics, Airport Planning, Report DAC-67264, Douglas
Aircraft Company, McDonnell-Douglas Corporation, Long Beach, Calif.,
September 1978.
32. DC-10 Airplane Characteristics, Airport Planning, Report DAC-67803A, Douglas
Aircraft Company, McDonnell-Douglas Corporation, Long Beach, Calif.,
January 1991.
33. Dimensions of Airline Growth, Boeing Commercial Airplane Company, Seattle,
Wash., March 1980.
34. Energy and Transportation Systems, Final Report, California Department of
Transportation, Sacramento, Calif., December 1981.
35. Environmental Protection, Annex 16 to the Convention on International Civil
Aviation, vol. 1: Aircraft Noise, 2d ed., International Civil Aviation Organization,
Montreal, Canada, 1988.
36. High Speed Civil Transport, Program Review, Boeing Commercial Airplane
Group, Seattle, Wash., 1990.
37. Jane’s All the World’s Aircraft, Franklin Watts, Inc., New York, annual.
38. Jet Aviation Development: One Company’s Perspective, John E. Steiner, Boeing
Commercial Airplane Group, Seattle, Wash, 1989.
39. “Jet Transport Characteristics Related to Airports,” R. Horonjeff and G. Ahlborn,
Journal of the Aerospace Transport Division, vol. 91 AT1, American Society of Civil
Engineers, New York, April 1965.
40. L1011 Airplane Characteristics, Airport Planning Document CER-12013, Lockheed
California Company, Burbank, Calif., December 1972.
41. MD-11 Airplane Characteristics for Airport Planning, Report MDC-K0388,
McDonnell-Douglas Corporation, Long Beach, Calif., October 1990.
42. MD-80 Series Airplane Characteristics for Airport Planning, Report MDC-J2904,
McDonnell-Douglas Corporation, Long Beach, Calif., February 1992.
43. MD-90-30 Aircraft Airport Compatibility Brochure, Report MDC-91K0393,
McDonnell-Douglas Corporation, Long Beach, Calif., February 1992.
44. Measurement, Construction and Maintenance of Skid Resistant Airport Pavement
Surfaces, Advisory Circular, AC 150/5320-12A, Federal Aviation Administration,
Washington, D.C., July 1986.
45. Noise Standards: Aircraft Type and Airworthiness Certification, Federal Aviation
Regulations, Part 36, Federal Aviation Administration, Washington, D.C., 1974.
46. Outlook for Commercial Aircraft 1980-1994, Douglas Aircraft Company,
McDonnell-Douglas Corporation, Long Beach, Calif., June 1980.
47. Pavement Grooving and Traction Studies, NASA SP-5073, Proceedings
of Conference at Langley Research Center, National Aeronautics and Space
Administration, Langley Field, Va., November 1968.
48. “Pneumatic Tire Hydroplaning and Some Effects on Vehicle Performance,”
W. B. Horne and U. T. Joyner, Proceedings of the Society of Automotive Engineers,
Paper 97UC, New York, 1965.
49. “Runway Grooving for Increasing Traction—the Current Program and an
Assessment of Available Results,” W. B. Horne and G. W. Brooks, 20th Annual
International Air Safety Seminar, Williamsburg, Va., December 1967.
50. Runway Length Requirements for Airport Design, Advisory Circular AC 150/5325-4B,
Federal Aviation Administration, Washington, D.C., January 2005.
51. Short-Haul Transport Aircraft Future Trends, Aerospace Industries Association of
America, Inc., Washington, D.C., January 1978.
52. “Simulated Vortex Encounters by a Twin-Engine Commercial Transport Aircraft
during Final Approach,” E. C. Hastings, Jr. and G. L. Keyser, Jr., International
Air Transportation Meeting, Paper 800775, Society of Automotive Engineers,
Warrendale, Pa., May 1980.
53. “Technology Requirements and Readiness for Very Large Vehicles,” D. William
Conner, AIAA Very Large Vehicle Conference, American Institute of Aeronautics
and Astronautics, Arlington, Va., April 1979.
54. The Braking Performance of an Aircraft Tire on Grooved Portland Cement Concrete
Surfaces, S. K. Agrawal and H. Diautolo, Federal Aviation Administration
Technical Center, Report FAA-RD-80-78, Federal Aviation Administration,
Atlantic City, N.J., January 1981.