Page 314 - Practical Machinery Management for Process Plants Major Process Equipment Maintenance and Repair

294 Major Process Equipment Maintenance and Repair

2. Merritt, H. E., Gear Engineering. John Wiley & Sons, New
York, 1971.
3. Thoma, Frederick A. (DeLaval Turbine, Inc.). “An Up-to-Date
Look at Marine Gear Tooth Loading.” The Society of Naval Ar-
chitects and Marine Engineers, Philadelphia.
4. Shipley, Eugene E., (Mechanical Technology, Inc.). “Testing Can
Reduce Gear Failures .” Hydrocarbon Processing, Dec . 1973 , pp .
61-65.
5. AGMA Standard for Surface Durability (Pitting) of Helical and
Herringbone Gear Teeth, AGMA 21 1.02. American Gear Manu-
facturers Association, Arlington, Va, 1969.
6. AGMA Standard for Rating the Strength of Helical and Herring-
bone Gear Teeth, AGMA 221.02. American Gear Manufacturers
Association, Arlington, Va, 1965.
7. AGMA Information Sheet-Gear Scoring Design Guide for Aero-
space Spur and Helical Power Gears, AGMA 217.01. American
Gear Manufacturers Association, Arlington, Va, 1965.
8. AGMA Gear Handbook- Wme 1 -Gear Classification, Materi-
als and Measuring Methods For Unassembled Gears, AGMA
390.03. American Gear Manufacturers Association, Arlington,
Va, 1973.
9. AGMA Standard-Nomenclature of Gear Tooth fiilure Modes,
ANSI/AGMA 110.04. American Gear Manufacturers Associa-
tion, Arlington, Va, 1980.
10. AGMA Standard Specification-Lubrication of Industrial En-
closed Gear Drives, AGMA 250.04. American Gear Manufactur-
ers Association, Arlington, Va, 1981.
11. Practice for Enclosed Speed Reducers or Increasers Using Spur,
Helical, Herringbone and Spiral Bevel Gears, AGMA 420.04.
American Gear Manufacturers Association, Arlington, Va, 1975.

12. Special Purpose Gear Units for Refinery Services, API 613 Sec-
ond Edition. American Petroleum Institute, Washington, D.C. ,
1977.
13. AGMA Standard-Practice for High Speed Helical and Herring-
bone Gear Units, AGMA 421.06. American Gear Manufacturers
Association, Arlington, Va, 1969.
14. Calistrat, Michael M. “Hydraulically Fitted Hubs, Theory and
Practice.” Proceedings of the Ninth Turbomachinery Symposium.
Texas A&M University, College Station, Tx, 1980, pp. 1-10.
15. Campbell, Al J.; Dodd, V. Ray; Essinger, Jack; Finn, Albert E.;
Jackson, Charles; Murray, Malcolm G., Jr.; and Hollis, Don B.,
“Thtorium on Alignment Techniques and Practices .” Proceedings