Page 239 - Principles of Catalyst Development
P. 239

REFERENCE  BOOKS  AND  JOURNALS                                 229
            3.3.  Boudart,  M.,  and  Djega-Mariadasson,  G.,  Kinetics  of Heterogeneous  Reactions,  Prin-
                ceton  University  Press,  Princeton  (1984).
            3.4.  Tamaru,  K.,  Dynamic  Heterogeneous  Catalysis,  Academic  Press,  New  York  (1978).


            4.  DIFFUSION

            4.1.  Jackson,  R.,  Transport  in  Porous  Catalysts,  Elsevier,  New  York (1970).
            4.2.  Mason,  E.  A.,  and  Malinauskas, A.  P.,  Gas Transport  in  Porous  Media,  The  Dusty-Gas
                 Model,  Elsevier,  New  York  (1983).
            4.3.  Satterfield,  C.  N.,  Mass  Transfer  ill  Heterogeneous  Catalysis,  MIT  Press,  Cambridge,
                 Massachusetts (1970).


            5.  DESIGN  OF  CATALYSTS

            5.1.   Balandin, A.  A.,  Scientific Selection of Catalysts, Tel  Aviv,  Israel,  Program for Scientific
                Translations (1968).
            5.2.  Trimm,  D.  L.,  Design  of Industrial Catalysts,  Elsevier,  New  York  (1980).

            6.  CATALYST  PREPARATION  AND  MANUFACTURE


            6.1.   Dallavalle,  J.  M.,  Micromeretics,  The  Technology  or Fine  Particles,  Pitman  Publishing
                 Corp.,  New  York  (19481.
            6.2.   Delmon, B., Jacobs, P.  A., and Poncelet, G. (Editors), Prepration orCatalrsts I,  Elsevier,
                 New  York  (1976).
            6.3.   Delmon, B., Grange, P., Jacohs, P.  and  Poncelet, G.  (Editors),  Preparation  or Catalysts
                 II,  Elsevier,  New  York  (1979).
            6.4.   Hench,  L.  L.,  and  Ulrich,  D.  R.,  Science  of Ceramic  Chemical  Processing,  John  Wiley,
                 New  York  (1986).
            6.5.  Iler,  R.,  The  Chemistry of Silica,  John  Wiley,  New  York  (1979).
            6.6.  Misra,  C.  (Editor),  Industrial  Alumina  Chemicals,  ACS  Monograph  Series  No.  184,
                American  Chemical  Society,  Washington,  D.C.  (1986).
            6.7.   Poncelet,  P.,  Grange,  P.,  and  Jacobs,  P.  A.  (Editors),  Preparatiol1  of Catalysts  Ill,
                 Elsevier,  New  York  (1983).
            6.8.   Poncelet,  P.,  Grange,  P.,  and  Jacobs,  P.  A.  (Editors),  Preparation  of Catalysts,  IV,
                Elsevier,  New  York  (1987).
            6.9.  Stiles,  A.  Y.,  Catah'st  Manufacture,  Marcel  Dekker,  New  York  (1983).
            6.10.  Sittig,  M.,  CatalYlt  Manufacture,  Recovery  and  Use,  Noyes  Data  Corporation,  Park
                Ridge,  New  Jersey  (1972).
            6.11.  Sittig,  M.,  Handhook  of Catalyst  Mal1ufacture,  Noyes  Data  Corporation,  Park  Ridge,
                New  Jersey  (1978).

           7.  CATALYST  CHARACTERIZATION  AND  TESTING


            7.1.  Anderson,  J.  R.,  and  Pratt,  K.  c.,  Introductiol1  to  Characterizarion  and  Testing  or
                Carah'''s,  Academic  Press,  New  York  (19851.
   234   235   236   237   238   239   240   241   242   243   244