Page 386 - Standard Handbook Petroleum Natural Gas Engineering VOLUME2

352 Reservoir Engineering

173. Melrose, J. C., and Brandner, C. F., “Role of Capillary Forces in Determining
Microscopic Displacement Efficiency for Oil Recovery by Waterflooding,”
J. Can. Pet. Tech., Vol. 13 (1974), pp. 54-62.
174. Owens, W. W., and Archer, D. L., ”The Effect of Rock Wettability on
Oil Water Relative Permeability Relationships,” J. Pet. Tech. (July 1971),
pp. 873-878.
175. McCaffery, F. G., and Bennion, D. W., “The Effect of Wettability on Two-
Phase Relative Permeabilities,” J. Can. Pet. Tech., Vol. 13 (1974), pp. 42-53.
176. Killins, C. R., Nielsen, R. F., and Calhoun, J. C., Jr., “Capillary Desatura-
tion and Imbibition in Rocks,” Prod. MonthEy, Vol. 18, No. 2 (Feb. 1953),
pp. 30-39.
177. Rust, C. F., “A Laboratory Study of Wettability Effects on Basic Core
Parameters,” paper SPE 986G, presented at the SPE Venezuelan Second
Annual Meeting, Caracas, Venezuela, Nov. 6-9, 1957.
178. Mungan, N., and Moore, E. J., “Certain Wettability Effects on Electrical
Resistivity in Porous Media,” J. Can. Pet. Tech. (Jan.-March 1968), pp. 20-25.
179. Morgan, W. B., and Pirson, S. J., “The Effect of Fractional Wettability on
the Archie Saturation Exponent,” Tmns., SPWLA, Fifth Aniiual Logging
Symposium, Midland, Texas, May 13-15, 1964.
Formation Evaluation
180. Timmerman, E. H., Practical Reservoir Engineering, PennWell Books, Tulsa
(1982)
181. Keelan, D., “Coring: Part 1-Why It’s Done,” World Oil (March 1985),
pp. 83-90.
182. Park, A., “Coring: Part 2-Core Barrel Types and Uses,” World Oil (April
1985), pp. 83-90.
183. Park, A., “Coring: Part 3-Planning the Job,” World Oil (May 1985),
pp. 79-86.
184. Park, A., “Coring: Part 4-Bit Considerations,” World Oil (June 1985),
pp. 149-154.
185. Park, A., “Coring: Part 5-Avoiding Potential Problems,” World Oil (July 1985),
pp. 93-98.
186. Toney, J. B., and Speights, J. L., “Coring: Part Midewall Operations,” World
Oil (Aug. 1, 1985), pp. 29-36.
187. Kraft, M., and Keelan, D., ”Coring: Part 7-Analytical Aspects of Sidewall
Coring,” World Oil (Sept. 1985), pp. 77-90.
188. Keelan, D., “Coring: Part %Plug and Full Diameter Analysis,” World Oil
(Nov. 1985), pp. 103-112.
189. Kersey, D. G., “Coring: Part 9-Geological Aspects,” World Oil (Jan. 1986),
pp. 103-108.
190. Keelan, D. K., “Core Analysis for Aid in Reservoir Description”J. Pet. Tech.
(Nov. 1982), pp. 2483-2491.
191. Anderson, G., Coring and Core Analysis Handbook, Pet. Pub. Co., Tulsa(1975).
192. “API Recommended Practice for Core-Analysis Procedure,” API RP 40, API
Prod. Dept., Dallas (Aug. 1960).
193. “Recommended Practice for Determining Permeability of Porous Media,”
API RP 27, third edition, API Prod. Dept., Dallas (Aug. 1956).
194. Stosur, J. J., and Taber, J. J., “Critical Displacement Ratio and Its Effect on
Wellbore Measurement of Residual Oil Saturation.” DaDer SPE 5509 DE
sented at the SPEAIME 50th Annual Fall Meeting, ?Dkl&, Sept. 28-Oc;. 1,
1975.