Page 343 - The Combined Finite-Discrete Element Method

326 BIBLIOGRAPHY

188. Pentland, A.P. and Williams, J.R. (1988) Virtual construction. Construction, 3(4).
189. Pentland, A.P. and Williams, J.R. (1989) Good vibrations: modal dynamics for graphics and animation.
SIGGRAPG ‘89, ACM Computer Graphics, 23(3).
190. Perkins, E. and Williams, J. (2001) A fast contact detection algorithm insensitive to object size. Engi-
neering Computations, 18(1/2), 48–61.
191. Perkins, P. and Williams, J.R. (2001) C-grid: Neighbor searching for many body simulation. ICADD-4,
427–438.
192. Preece, D.S. (1992) The influence of damping on computer simulations of rock motion. In Proceedings
of the 25th Annual Oil Shale Symposium, Golden, CO.
193. Preece, D.S. and Chung, S.H. (2002) Rock blasting 3-D discrete element heave predictions for surface
coal mines and rock quarries. In Proceedings of NARMS-TAC 2002, Toronto, Ontario.
194. Preece, D.S., Burchell, S.L. and Scovira, D.S. (1993) Coupled explosive gas flow and rock motion mod-
eling with comparison to bench blast field data. In Proceedings of the Fourth International Symposium on
Rock Fragmentation by Blasting, Vienna, Austria.
195. Preece, D., Jensen, R., Perkins, E. and Williams, J. (1999) Sand production modeling using superquadric
discrete elements and coupling of fluid flow and particle motion. Proceedings of the 37th U.S. Rock
Mechanics Symposiu, Amadei, Kranz, Scott and Smeallie (Eds.), Balkema, Amsterdam.
196. Preece, D.S. and Taylor, L.M. (1989) Complete computer simulation of crater blasting including frag-
mentation and rock motion. Proceedings of Research Symposium, Society of Explosive Engineers Spring
Meeting.
197. Preece, D.S. and Taylor, L.M. (1990) Spherical element bulking mechanisms for modeling blasting induced
rock motion. Proceedings of the Third International Symposium on Rock Fragmentation by Blasting,
Brisbane, Queensland, Australia.
198. Preece, D.S. and Knudsen, S.D. (1992) Computer modeling of gas flow and gas loading of rock in a
bench blasting environment. Proceedings of the 33rd U.S. Symposium on Rock Mechanics,Santa Fe, NM.
199. Preece, D.S. (1990) Rock motion simulation of confined volume blasting. Proceedings of the 31st U.S.
Symposium on Rock Mechanics, Golden, CO.
200. Reddy, J.N. (1984) Energy and Variational Methods in Applied Mechanics. John Wiley & Sons, New
York.
201. Richman, M.W. (1988) Homogeneous shear flow of highly inelastic disks: the full range of solid fraction.
Proc. 7th Conf. of Engineering Mechanics, Blacksburg, Virginia.
202. Ristow, G.H. (1998) Flow Properties of Granular Materials in Three-dimensional Geometries.Verlag
Gorich & Weiersh¨ auser, Marburg, Germany.
203. Rothenburg, L. and Bathurst, R.J. (1991) Numerical simulation of idealized granular assemblies with
plane elliptical particles. Comput. and Geotech. 11, 315–329.
204. Sakaguchi, H. and Muhlhaus, H.B. (1997) Mesh free modelling of failure and localization in brittle rock.
In Deformation and Progressive Failure in Geomechanics, Asoaka, Adachi and Oka (Eds.), Pergamon,
15–21.
205. Sawamoto, Y., Tsubota, H., Kasai, Y., Koshika, N. and Morikawa, H. (1998) Analytical studies on local
damage to reinforced concrete structures under impact loading by discrete element method. Nuclear Eng.
Des. 179, 157–177.
206. Schamaun, J.T. (1984) Methods for predicting rubble motion during blasting. Proceedings of 25th U.S.
Symposium on Rock Mechanics, Northwestern University.
207. Schubert H., Herrmann, W. and Rumpf, H. (1975) Deformation behavior of agglomerates under tensile
stress. Powder Technology, 2, 121.
208. Serrano, A.A. and Rodriguez-Ordz, J.M. (1973) A contribution to the mechanics of heterogeneous granular
media. Proc. Symp. on the Role of Plasticity in Soil Mechanics, Cambridge, 215–228.
209. Shahinpoor, M. and Sharpass, A. (1982) Frequency distribution of voids in monolayers of randomly
packed equal spheres. Bulk Solids Handling, 2, 825–838.
210. Shi, G. and Goodman, R.E. (1989) Generalization of two-dimensional discontinuous deformation analysis
for forward modelling. Int. J. Num. Analy. Meth. Geomech. 13, 359–380.
211. Shi, G. (1988) Discontinuous deformation analysis: a new method for computing stress, strain and sliding
of block systems. PhD Thesis, Department Civil Engineering, University of California, Berkeley.
212. Shi, G. (1993) Block System Modeling by Discontinuous Deformation Analysis. Computational Mechanics
Publications, Boston.
213. Shi, G.H. (1989) Block System Modeling by Discontinuous Deformation Analysis. Doctoral Dissertation,
Department of Civil Engineering, University of California, Berkeley.