Page 1 - Using ANSYS for Finite Element Analysis Dynamic, Probabilistic, Design and Heat Transfer Analysis

EBOOKS Using ANSYS for Finite Element
FOR THE Analysis SUSTAINABLE STRUCTURAL
ENGINEERING SYSTEMS COLLECTION
LIBRARY Dynamic, Probabilistic Design and Heat Mohammad Noori, Editor
Transfer Analysis, Volume II
Create your own Wael A. Altabey • Mohammad Noori • Libin Wang ALTABEY • NOORI • WANG
Customized Content
Bundle—the more Over the past two decades, the use of nite element method as a
books you buy, design tool has grown rapidly. Easy to use commercial software, such as
the greater your ANSYS, have become common tools in the hands of students as well as Using ANSYS
discount! practicing engineers. The objective of this book is to demonstrate the
use of one of the most commonly used Finite Element Analysis software,
ANSYS, for linear static, dynamic, and thermal analysis through a series for Finite
THE CONTENT
of tutorials and examples. Some of the topics covered in these tutorials
• Manufacturing include development of beam, frames, and Grid Equations; 2-D elastic-
Engineering ity problems; dynamic analysis; composites, and heat transfer problems. Element
• Mechanical
& Chemical These simple, yet, fundamental tutorials are expected to assist the users
Engineering with the better understanding of nite element modeling, how to control Analysis
• Materials Science modeling errors, and the use of the FEM in designing complex load
& Engineering bearing components and structures. These tutorials would supplement
• Civil & a course in basic nite element or can be used by practicing engineers
Environmental who may not have the advanced training in nite element analysis. Dynamic, Probabilistic
Engineering
• Advanced Energy Wael A. Altabey is an assistant professor in the department of Design and Heat
Technologies mechanical engineering, faculty of engineering, Alexandria University,
Alexandria, Egypt and has been a postdoctoral researcher at the Transfer Analysis
THE TERMS International Institute for Urban Systems Engineering, Southeast
• Perpetual access for University, Nanjing, China. Using ANSYS for Finite Element Analysis, Volume II
a one time fee Volume II
Mohammad Noori is a professor of mechanical engineering at California
• No subscriptions or
Polytechnic State University in San Luis Obispo, California, USA, and a
access fees
fellow of the American Society of Mechanical Engineers. Dr Noori has
• Unlimited
over 34 years of experience as a scholar and educator. He has also been
concurrent usage
a distinguished visiting professor at the International Institute for Urban
• Downloadable PDFs Wael A. Altabey
Systems Engineering, Southeast University, Nanjing, China.
• Free MARC records
Mohammad Noori
Libin Wang is a professor and the dean of the school of civil engineer-
For further information,
a free trial, or to order, ing at Nanjing Forestry University, in Nanjing, China. He has been an Libin Wang
contact: educator and scholar, for over 20 years, and has taught the subject of
sales@momentumpress.net nite element analysis both at the undergraduate and graduate level.
ISBN: 978-1-94708-322-6