Page 10 - Using ANSYS for Finite Element Analysis Dynamic, Probabilistic, Design and Heat Transfer Analysis

list of figures

Figure 2.1. Illustrating the combined effect on modulus of the
addition of fibers to a resin matrix. 21
Figure 2.2. Illustrates the tensile load applied to a composite
body. 22
Figure 2.3. Illustrates the compression load applied to a
composite body. 22
Figure 2.4. Illustrates the shear load applied to a composite
body. 23
Figure 2.5. Illustrates the loading due to flexure on a composite
body. 23
Figure 2.6. Tensile strength of common structural materials. 24
Figure 2.7. Tensile modulus of common structural materials. 25
Figure 2.8. Specific tensile strength of common structural
materials. 25
Figure 2.9. Specific tensile modulus of common structural
materials. 26
Figure 2.10. Layered model showing dropped layer. 29
Figure 2.11. Sandwich construction. 32
Figure 2.12. Layered shell with nodes at midplane. 32
Figure 2.13. Layered shell with nodes at bottom surface. 33
Figure 2.14. Example of an element display. 36
Figure 2.15. Sample LAYPLOT display for [45/−45/−45/45]
sequence. 37
Figure 3.1. The flow of information during a probabilistic design
analysis. 75
Figure 3.2. The normal probability density function (pdf). 77