Page 178 - Using ANSYS for Finite Element Analysis A Tutorial for Engineers
P. 178
thermAl stress AnAlysIs • 165
7. Apply convection loads to the solid model lines:
Main Menu > Solution > -Loads- Apply > -Thermal- Convection
> On Lines + Pick the outer four lines (10, 2, 7, and 6), then [OK]
Set VALI = 0.69e-4 and VAL2I = 70, then [Apply]
Pick the inner two lines (9 and 13), then [OK]
Set VALI = 0.28e-3 and VAL2I = 450, then [OK]
Utility Menu > Plot > Multi-Plots
Or issue:
/SOLU SFL,2,CONV,0.69e-4, ,70
SFL,6,CONV,0.69e-4, ,70
SFL,7,CONV,0.69e-4, ,70
SFL,10,CONV,0.69e-4, ,70
SFL,9,CONV,0.28e-3, ,450
SFL,13,CONV,0.28e-3, ,450
GPLOT
