Page 189 - Using ANSYS for Finite Element Analysis A Tutorial for Engineers
P. 189

176  •   Using ansys for finite element analysis
                  (e) Plot the longitudinal (axial) stress:



























                  Main Menu > General Postproc > Plot Results > -Contour Plot-
                                        Nodal Solu ...
                         Pick “Stress” and “Y-direction SY”, then [OK]
                                    Or issue: PLNSOL,S,Y
                  (f)  Plot the tangential (circumferential or hoop) stress:
                  Main Menu > General Postproc > Plot Results > -Contour Plot-
                                        Nodal Solu ...
                         Pick “Stress” and “Z-direction SZ”, then [OK]
                                    Or issue: PLNSOL,S,Z
   184   185   186   187   188   189   190   191   192   193   194