Page 29 - Quick Guide to Welding and Weld Inspection by S.E. Hughes, Clifford Matthews
P. 29
A Quick Guide to Welding and Weld Inspection
left. When the same symbol is shown on the top and bottom
of the reference line (double V, double bevel, etc.) it will be a
mirror image of itself (based on the reference line being the
mirror).
BSEN 22553 specifics (Fig. 1.12)
. BSEN 22553 does not have a single reference line with the
symbols placed above and/or below it to specify if the weld
is on the ‘arrow side’ or ‘other side’, but adds a dashed line
Figure 1.11 Supplementary information
14
Woodhead Publishing Ltd – A Quick Guide to Welding and Weld Inspection
Data Standards Ltd, Frome, Somerset – 17/9/200901QG Welding chap1.3d Page 14 of 16
