Page 156 - Advanced Mine Ventilation

136 Advanced Mine Ventilation

Figure 9.8 Stages of wear on a cutting bit.

References

[1] Evans I, Pomeroy CD. Strength, fracture and workability of coal. New York: Pergamon
Press; 1966. p. 195.
[2] Thakur PC. Mass distribution, percent yield, non-settling size and aerodynamic shape factor
of respirable coal dust particles [M.S. Thesis]. The Penn State University; 1971. p. 133.
[3] Leonard JW, Mitchell DR. Coal preparation, the American Institute of mining. New York:
Metallurgical and Petroleum Engineers, Inc.; 1968. p. 6e24.
[4] Gomez M, Hazen K. Prediction of coal grindability from exploration data, U.S. Bureau of
Mines. Report of Investigation 1970;7421:34.
[5] Panov GE. Dust formation kinetics as a function of the principal mechanical properties of
coal. Soviet Mining Science, (English Translation 1966:511e4.
[6] Thakur PC, Sinha AK. Respirable dust index for U.S. coals. Colliery Guardian August
1973:294e8.
[7] Srikanth R, Ramani R. Single-breakage studies to determine the relationship between
respirable dust generation and coal seam characteristics. Applied Occupational and
Environmental Hygiene 1996;II(7):662e8.
[8] Jha P. et.al. Relationship between respirable dust generation and coal seam characteristics.
Applied Occupational and Environmental Hygiene 1996;II(7):655e61.
[9] Khair AW. In: Principles of bit wear and dust generation, new technology in mine health and
safety, SME Annual Meeting, Phoenix, USA; 1992. p. 175e83.