Page 559 - Air and Gas Drilling Manual

10-84 Air and Gas Drilling Manual
2. Hutchison, S. O., “Foam Workovers Cut Costs 50%,” World Oil, 1969.
3. Hutchison, S. O., and Anderson, G. W., “Preformed Stable Foam Aids
Workover, Drilling,” Oil and Gas Journal, 1972.
4. Mitchell, B. J., “Test Data Fill Theory Gap on Using Foam as a Drilling Fluid,”
Oil and Gas Journal, 1971.
5. Byer, A. H., Millhone, R. S., and Foote, R. W., “Flow Behavior of Foam as a
Well Circulating Fluid,” SPE 3986, Presented at the SPE 47th Annual
Technical Conference and Exhibition, San Antonio, Texas, October 8-10, 1972.
6. Allan, P. D., “Nitrogen Drilling System for Gas Drilling Applications,” SPE
28320, Presentation at the SPE 69th Annual Technical Conference and Exhibition,
New Orleans, Louisiana, September 25-28, 1994.
7. API Recommended Practice for Testing Foam Agents for Mist Drilling, API
RP-46, November 1966.

8. Abbott, W. K., An Analysis of Slip Velocities of Spherical Particles in Foam
Drilling Fluid, Master of Science Thesis, Colorado School of Mines, Golden,
Colorado, 1974.

9. Krug, J. A., and Mitchell, B. J., “Charts Help Find Volume, Pressure Needed for
Foam Drilling,” Oil and Gas Journal, February 7, 1972.
10. Lord, D. L., “Mathematical Analysis of Dynamic and Static Foam Behavior.”
SPE 7927, Presented at the SPE Symposium on Low-Permeability Gas
Reservoirs, Denver, Colorado, May 20-22, 1979.
11. Okpobiri, G. A., and Ikoku, C. U., “Volumetric Requirements for Foam and
Mist Drilling Operations,” SPEDE, February 1986.

12. Daugherty, R. L., Franzini, J. B., and Finnemore, E. J., Fluid Mechanics with
Engineering Applications, Eighth Edition, McGraw-Hill, 1985.