Page 156 - Amphibionics : Build Your Own Biologically Inspired Robot
P. 156
Amphibionics 05 3/24/03 8:44 AM Page 135
Chapter 5 / Serpentronic: Build Your Own Robotic Snake
Cut two pieces of 1/16-inch aluminum to a size of 1 inch 3-1/2
inches. Bend and drill each piece according to the dimensions
shown in Figure 5.25. These two pieces are labeled I. The finished
pieces are shown in Figure 5.26 and will be used as the side sup-
ports for the robot’s head.
FIGURE 5.25
Cutting, drilling, and
bending guide for
head support pieces
labeled I.
135
