Page 8 - Analysis, Synthesis and Design of Chemical Processes, Third Edition

3.1 Design Calculations for Batch Processes
3.2 Gantt Charts and Scheduling
3.3 Nonoverlapping, Operations, Overlapping Operations, and Cycle Times
3.4 Flowshop and Jobshop Plants
3.4.1 Flowshop Plants
3.4.2 Jobshop Plants
3.5 Product and Intermediate Storage and Parallel Process Units
3.5.1 Product Storage for Single Product Campaigns
3.5.2 Intermediate Storage
3.5.3 Parallel Process Units

3.6 Design of Equipment for Multiproduct Batch Processes
3.7 Summary
References
Short Answer Questions
Problems
Chapter 4 Chemical Product Design
4.1 Strategies for Chemical Product Design
4.2 Needs
4.3 Ideas
4.4 Selection
4.5 Manufacture
4.6 Batch Processing

4.7 Economic Considerations
4.8 Summary
References
Chapter 5 Tracing Chemicals through the Process Flow Diagram
5.1 Guidelines and Tactics for Tracing Chemicals
5.2 Tracing Primary Paths Taken by Chemicals in a Chemical Process
5.3 Recycle and Bypass Streams
5.4 Tracing Nonreacting Chemicals
5.5 Limitations
5.6 Written Process Description
5.7 Summary
Problems
Chapter 6 Understanding Process Conditions
6.1 Conditions of Special Concern for the Operation of Separation and Reactor Systems
6.1.1 Pressure
6.1.2 Temperature

6.2 Reasons for Operating at Conditions of Special Concern
6.3 Conditions of Special Concern for the Operation of Other Equipment
6.4 Analysis of Important Process Conditions
6.4.1 Evaluation of Reactor R-101
6.4.2 Evaluation of High-Pressure Phase Separator V-102
6.4.3 Evaluation of Large Temperature Driving Force in Exchanger E-101
6.4.4 Evaluation of Exchanger E-102
6.4.5 Pressure Control Valve on Stream 8
6.4.6 Pressure Control Valve on Stream from V-102 to V-103