Page 9 - Analysis, Synthesis and Design of Chemical Processes, Third Edition

6.5 Summary
References
Short Answer Questions
Problems
SECTION 2 ENGINEERING ECONOMIC ANALYSIS OF CHEMICAL PROCESSES
Chapter 7 Estimation of Capital Costs
7.1 Classifications of Capital Cost Estimates
7.2 Estimation of Purchased Equipment Costs
7.2.1 Effect of Capacity on Purchased Equipment Cost
7.2.2 Effect of Time on Purchased Equipment Cost

7.3 Estimating the Total Capital Cost of a Plant
7.3.1 Lang Factor Technique
7.3.2 Module Costing Technique
7.3.3 Bare Module Cost for Equipment at Base Conditions
7.3.4 Bare Module Cost for Nonbase Case Conditions
7.3.5 Combination of Pressure and MOC Information to Give the Bare Module Factor, F BM , and
Bare Module Cost, C BM

7.3.6 Algorithm for Calculating Bare Module Costs
7.3.7 Grass Roots and Total Module Costs
7.3.8 A Computer Program (CAPCOST) for Capital Cost Estimation Using the Equipment Module
Approach
7.4 Summary
References
Short Answer Questions
Problems
Chapter 8 Estimation of Manufacturing Costs
8.1 Factors Affecting the Cost of Manufacturing a Chemical Product
8.2 Cost of Operating Labor

8.3 Utility Costs
8.3.1 Background Information on Utilities
8.3.2 Calculation of Utility Costs
8.4 Raw Material Costs
8.5 Yearly Costs and Stream Factors
8.6 Estimating Utility Costs from the PFD
8.7 Cost of Treating Liquid and Solid Waste Streams
8.8 Evaluation of Cost of Manufacture for the Production of Benzene via the Hydrodealkylation of
Toluene
8.9 Summary
References
Short Answer Questions
Problems

Chapter 9 Engineering Economic Analysis
9.1 Investments and the Time Value of Money
9.2 Different Types of Interest
9.2.1 Simple Interest
9.2.2 Compound Interest
9.2.3 Interest Rates Changing with Time