Page 136 - Applied Photovoltaics

Luque, A., Sala, G., Araújo, G.L. & Bruton, T. (1995), ‘Cost reducing potential of
photovoltaic concentration’, International Journal of Solar Energy, 17, pp. 179–198.
Mack, M. (1979), ‘Solar power for telecommunications’, Telecommunication Journal
of Australia, 29(1), pp. 20–44.
Messenger, R. & Ventre, J. (2000), Photovoltaic Systems Engineering, CRC Press,
Boca Raton.

Nann, S. (1990), ‘Tracking photovoltaic systems for moderate climates’, in 1989
Congress of ISES, 1, Pergamon Press, UK, pp. 392–396.

Pedals, P. (1993), ‘Home power with NiCad batteries’, Earth Garden, March–May,
pp. 68–69.

Preiser, K. (2003), ‘Photovoltaic systems’, in Luque, A. & Hegedus, S. (Eds.),
Handbook of Photovoltaic Science and Engineering, Wiley, Chichester, pp. 753–798.
Rannels, J.E. (1991), ‘Worldwide systems and applications’, Proc. 22nd IEEE
Photovoltaic Specialists Conference, Las Vegas, pp. 479–485.
Roberts, S. (1991) Solar Electricity. A Practical Guide to Designing and Installing
Small Photovoltaic Systems, Prentice Hall, New York.
Ross, J.N. (2003), ‘System electronics’, in Markvart, T. & Castañer, L. (Eds.),
Practical Handbook of Photovoltaics: Fundamentals and Applications, Elsevier,
Oxford, pp. 565–585.
Sandia National Laboratories (1991), Stand-Alone Photovoltaic Systems—A
Handbook of Recommended Design Practices, Albuquerque, New Mexico
(www.sandia.gov/pv/docs/Programmatic.htm).
Sauer, U. D. (2003), ‘Electrochemical storage for photovoltaics’, in Luque, A. &
Hegedus, S. (Eds.), Handbook of Photovoltaic Science and Engineering, Wiley,
Chichester, pp. 799–862.
Schmid, J. & Schmidt, H. (2003), ‘Power conditioning and photovoltaic power
systems’, in Luque, A. & Hegedus, S. (Eds.), Handbook of Photovoltaic Science and
Engineering, Wiley, Chichester, pp. 863–903.

Solar Energy Systems (2004), Sun Mill Quality Solar Pumps (www.solco.com.au).
Spiers, D. (2003), ‘Batteries in PV systems’, in Markvart, T. & Castañer, L. (Eds.),
Practical Handbook of Photovoltaics: Fundamentals and Applications, Elsevier,
Oxford, pp. 587–631.
Standards Australia (2005), Installation of Photovoltaic (PV) Arrays, AS/NZS 5033.

Standards Australia (1993), Secondary Batteries for use with Stand-Alone Power
Systems Part 1: General Requirements, AS 4086.1.
Standards Australia (1997), Secondary Batteries for use with Stand-Alone Power
Systems Part 2: Installation and Maintenance, AS 4086.2.

123