Page 262 - 02. Subyek Computer Aided Design - Beginner’s Guide to SOLIDWORKS 2019- Level 1 by Alejandro Reyes

Beginner's Guide to SOLIDWORKS 2019- Level I

1: I Properties

Selected Entities

Edge<1>
Point2

0

Existing Relations

0

(D Under Defined

Add Relations

@ A pierce relation is done between an element that is oblique or perpendicular

, to the sketch plane and a point (or endpoint) in the sketch. Think of it as a

needle piercing through a fabric, the sketch being the fabric and the helix (or

curve, model edge or another sketch element) the needle.

9.4. - Select the Sweep command and make the sweep using the last sketch as a

profile and the Helix as a Path. Note the Preview and click OK to finish.

1/> Sweep Profile(Sketch2)

Path (He I iX/S pi ra 11)

Profile and Path

@Sketch Profile

0 Circular Prof ile

0 j Sketch2

c

Guide Curves

Options v
0

Start and End Tangency

D Thin Feature v

Curvature Display v

258