Page 280 - 02. Subyek Computer Aided Design - Beginner’s Guide to SOLIDWORKS 2019- Level 1 by Alejandro Reyes

Beginner's Guide to SOLIDWORKS 2019- Level I

12.11. - Rotate to a Right View and add the following sketch in the "Right Plane"

near the top of the bottle, close to the helix's start point; this will be the thread's

Profile. For the vertical line we'll use a "Midpoint Line"; the point at the middle of

the line will be used to add a horizontal relation with the arc's center point, and a

Pierce relation to the helix. Draw, dimension and add the geometric relations

indicated, then Exit the sketch and make a sweep feature using the helix curve

and this thread profile. After creating the sweep, if needed, hide the helix curve.

7.

j}S SOLIDWORKS File Edit ~ ~0.036, 90°

I

Exit Smart
/ line
Sketch Dimension +
p

A= 135.1° R = .025
>I

Features

1--- .075 - ---1

ake Horizontal

0 + 25.00°

R.040

Horizontal Relation Add Dimensions (Use Shift for 0.075")

~.075 ~

L...------4 Make Pierce

+

R.040 ___,

R.040 ____J

Add Pierce Relation Finished Sketch

278