Page 244 - Biomedical Engineering and Design Handbook Volume 2, Applications

STERILE MEDICAL DEVICE PACKAGE DEVELOPMENT 223

ASTM Book of Standards, Vol. 15.10, ASTM International, West Conshohocken, PA, www.astm.org.
ASTM D7386-08, Standard Practice for Performance Testing of Packages for Single Parcel Delivery Systems,
ASTM International, West Conshohocken, PA, www.astm.org.
ASTM F1980-07, Standard Guide for Accelerated Aging of Sterile Barrier Systems for Medical Devices, ASTM
International, West Conshohocken, PA, www.astm.org.
Clark, G., Shelf Life of Medical Devices, Rockville, MD, FDA Division of Small Manufacturers Assistance,
April 1991.
Code of Federal Regulations 21 CFR Part 820, Good Manufacturing Practices for Medical Devices: General,
June 1997.
Donohue, J., and Apostolou, S., Predicting Shelf Life from Accelerated Aging Data: The D&A and Variable Q10
Techniques, Medical Device Diagnostic Industry, pp. 68–72, June 1998.
Dyke, Denis G., Medical Packaging Validation: Complying with the Quality System Regulation and ISO 11607,
Medical Device and Diagnostic Industry, August 1998.
EN 868 Part 1, Packaging Materials and Systems for Medical Devices Which are to be Sterilized: General
Requirements and Test Methods, December 1997.
EN 868-1: 1997, Packaging Materials and Systems for Medical Devices Which Are to Be Sterilized—Part 1:
General Requirements and Test Methods, February 1997.
FDA Modernization Act of 1997: Guidance for the Recognition and Use of Consensus Standards: Availability,
Docket No. 98D-0085, www.fda.gov/cdrh/modact/fro225af.html.
FDA Modernization Act of 1997: Guidance for the Recognition and Use of Consensus Standards; Availability,
Federal Register, February 25, 1998, Vol. 63, No. 37, pp. 9561–69, www.fda.gov/cdrh/modact/fr0225af.html.
Fielding, Paul, Medical Packaging Legislation in Europe, Medical Device and Diagnostic Industry Magazine,
November 1999.
Fotis, N, et al., Six Myths about ISO 11607, Medical Device and Diagnostic Industry Magazine, May 2007.
Fotis, N., and Bix, L., Sample Size Selection Using a Margin of Error Approach, Medical Device and Diagnostic
Industry Magazine, October 2006.
Freiherr, G., Issues in Medical Packaging: Cost-Consciousness Leads the Way in New World Order, Medical
Device and Diagnostic Industry, pp. 51–57, August 1994.
Hackett, Earl T., Dye Penetration Effective for Detecting Package Seal Defects, Packaging Technology and
Engineering, August 1996.
Hemmerich, K., General Aging Theory and Simplified Protocol for Accelerated Aging of Medical Devices,
Medical Plastics and Biomaterials, pp. 16–23, July/August 1998.
Henke, C., and Reich, R., The Current Status of Microbial-Barrier Testing of Medical Device Packaging, Medical
Device and Diagnostic Industry, pp. 46–49, 94, August 1992.
Hooten, Fred W., A Brief History of FDA Good Manufacturing Practices, Medical Device and Diagnostic
Industry Magazine, May 1996.
Hudson, B., and Simmons, L., Streamlining Package Seal Validation, Medical Device and Diagnostic Industry,
pp. 49–52, 89, October 1992.
International Safe Transit Association, ISTA Project 1A, Pre-Shipment Test Procedures, 2009.
Jones, Lois, et al., In Quest of Sterile Packaging: Part 1; Approaches to Package Testing, Medical Device and
Diagnostics Industry, August 1995.
Jones, Lois, et al., In Quest of Sterile Packaging: Part 2; Physical Package Integrity Test Methods, Medical
Device and Diagnostics Industry, September 1995.
Lambert, B., and Tang, F., Overview of ANSI/AAMI Material Qualification Guidance; Iterative Accelerated
Aging Method, Proceedings 1, Session 108, pp. 55–64, Medical Design and Manufacturing-West, Anaheim,
CA, 1997.
Medical Device Directive (MDD), Council Directive 93/42/EEC, Official Journal of European Communities,
14(10), 1992.
Nolan, Patrick J., Medical Device Package Design: A Protocol for Sterile Package Integrity Validation, Medical
Device and Diagnostic Industry, November 1995.
Nolan, Patrick J., Physical Test Methods for Validating Package Integrity, The Validation Consultant,
3(6), July 1996.