Page 171 - CNC Robotics
P. 171
CNC Robotics
Insert the first an d last bolts into the beam through the access
holes an d tu rn a couple of nuts onto them (see Figu re 7. 14).
Figure 7.14
Inserting the support
bolts.
Screw the first and last bo lts into the rail as far as the y will go and
run one of the nuts to the bea m, tightening it to ma ke the bolt
rigid. Check the height of the rail at one end and adjust the oppo-
site end to match (see Figure z. i s ).
Figure 7.15
Finding the working
height.
162
