Page 176 - CNC Robotics
P. 176
Chapter 7 / The Gantry and X-axis
At 1-1/4 inch from the side of the hole, I cut a notch in the stock
to a 1/2 inch from the top. Thi s notch made the holder adjustable
(see Figure 7.22).
Figure 7.22
Notch cutting.
I drill ed four holes from the top down for the bolts that will ho ld it
to the gantry feet (see Figure 7.23).
Figure 7.23
Drilling bearing holder
installation bolt holes.
167
