Page 266 - CNC Robotics

CNC Robotics

Use a piece of woo d at each clamp so that the router bod y doesn 't
sustai n any damage when the clamps a re tighte ned (see Figure
11. 17).

Figure 11.17
Wood to protect the
router.

Tighte n the clamps and you're do ne! To get the router alm ost pe r-
pendicular, place a long bit in the collet and use a square to find
an accu rate po sition. The hole in the base of the holder is just
large enough to allow the bit to be cha nged without removing the
router (see Figure 11.18).

256