Page 264 - CNC Robotics

CNC Robotics

On the back of the back plate, remove enough material from
between the sets of ope nings to allow the pipe clamps to recess,
keeping the holder flat to the z-table (see Figure 11. 14).

Figure11.14
Remove wood between
openings.

-,

IJl ll~ 11.11

Unscrew the clamps so that they can be fed from the front through
a n opening an d up through the next openi ng (see Figure 1I. 15).
Screw the base piece of plywood to the bottom of the back ply. To
mount a router, place a piece of wood at the openings between the
clamps to move the router out closer to the center of the hole in
the base (see Figure 11.16) .

254