Page 384 - Chemical process engineering design and economics

Separator Design 363

64. Choi, H.D., The Effect of Operating Variables on the Extraction Efficiency
of a Reciprocating-Plate Extractor, Masters Thesis, Stevens Institute of
Technology, Hoboken, NJ, 1979.
65. Henley, E.J., Seader, J.D., Separation Process Principles, John Wiley &
Sons, New York, NY, 1998.
66. Perry's Chemical Engineers' Handbook, Perry, R. C., Green, D.W., eds.,
McGraw-Hill, New York, 1997.
nd
67. Bennett, C.O., Myers, J. E., Momentum, Heat, and Mass Transfer, 2 ed.,
McGraw-Hill, New York, NY, 1974.
68. Shukla, H.M., Hicks, R.E., Process Design Manual for Stripping Organics,
NTIS PB84-232628, US Dept. of Commerce, Aug. 1984.
69. Drew, J.W., Design for Sovent Recovery, Chem. Eng. Progr., 71, 2, 92,
1975.
70. Tawfik, W.V., Optimization of Fuel Grade Ethanol Recovery System Us-
ing Solvent Extraction, PhD Thesis, Georgia Institute of Technology, At-
lanta, GA, 1986.
71. Cussack, R., Karr, A., A Fresh Look at Liquid-Liquid Extraction, Chem.
Eng., 98,4, 112, 1991.
72. Scheiman, A.D., Size Vapor-Liquid Separators Quickly by Nomograph,
Hydrocarbon Process. & Pet. Refiner, 42,10,165, 1963.
73. Sigales, B. More on the Design of Reflux Drums, Chem. Eng., 82, 20, 87,
1975.
74. Humphrey, J..L., Keller, G.E., Separation Process Technology, McGraw-
Hill, New York, NY, 1997.
75. Frank, O., Personal Communication, Consulting Engineer, Convent Sta-
tion, NJ, Jan. 2002.
76. Student Contest Problem, American Institute of Chemical Engineers, New
York, NY, 1987.
77. Brochure, Goodloe Column Packings, Bulletin 891 B-2, Otto H. York Co.,
Parsippany, NY, 1996.
78. Brochure, Separation Columns for Distillation and Absorption, Sulzer
Brothers Lmt., Winterthur, Switzerland, 1988.

Copyright © 2003 by Taylor & Francis Group LLC