Page 135 - Design of Reinforced Masonry Structures

MATERIALS OF MASONRY CONSTRUCTION 3.29

3.3 MSJC (2008). Commentary on Building Code Requirements for Masonry Structures, (TMS
602-08/ACI 530-08/ASCE 5-08/TMS 402-08), American Concrete Institute, Farmington
Hills, MI; Structural Engineering Institute of the ASCE, Reston, VA; and the Masonry Society,
Boulder, CO.
3.4 MSJC (2008). Specification for Masonry Structures, (TMS 602-08/ ACI 530.1-08/ASCE
6-08), American Concrete Institute, Farmington Hills, MI; Structural Engineering Institute of
the ASCE, Reston, VA; and the Masonry Society, Boulder, CO.
3.5 MSJC (2008). Commentary on Specification for Masonry Structures, (TMS 602-08/
ACI 530.1-08/ASCE 6-08/), American Concrete Institute, Farmington Hills, MI; Structural
Engineering Institute of the ASCE, Reston, VA; and the Masonry Society, Boulder, CO.
3.6 IBC (2009). International Building Code, International Code Council, Falls Church, VA.
3.7 ASTM: Specification for Mortar for Unit Masonry (C270-05a), ASTM International, West
Conshohocken, PA, 2002.
3.8 Farny, J. A., Milander, J. M., and Panarese, W. C. (2008). Concrete Masonry Handbook, Portland
Cement Association, Skokie, IL.
3.9 Panarese, W. C., Kosmatka, S. H., and Randall, F. A. (1991). Concrete Masonry Handbook,
Portland Cement Association, Skokie, IL.
3.10 Davison, J. I. (1975). “Development of ASTM Specifications for Mortar for Unit Masonry
(C 270),” in Masonry: Past and Present, STP 589, American Society for Testing and Materials, PA.
3.11 IMI (1997). “Mortar for Masonry,” Masonry Construction Guide, Section 7-5, International
Masonry Institute, Washington, DC.
3.12 ASTM: Specification for Portland Cement (C150-05), ASTM International, West Conshohocken,
PA, 2005.
3.13 ASTM: Specification for Aggregate for Masonry Mortar (C144-04), ASTM International, West
Conshohocken, PA, 2004.
3.14 IMI (1997). “Masonry Grout,” Masonry Construction Guide, Section 7-10, International
Masonry Institute, Washington, DC.
3.15 ASTM: Standard Test Method for Sampling and Testing Grout, (C1019-05), ASTM International,
West Conshohocken, PA, 2005.
3.16 ASTM: Standard Specification for Grout for Masonry (C476-02), ASTM International, West
Conshohocken, PA, 2002.
3.17 ASTM: Standard Method for Capping Cylindrical Concrete Specimens (C617), ASTM
International, West Conshohocken, PA, 2001.
3.18 ASTM: Standard Method for Compressive Strength of Cylindrical Concrete Specimens (C39),
ASTM International, West Conshohocken, PA, 2001.
3.19 ASTM: Test Methods for Sampling and Testing Brick and Structural Clay Tile (C67-05), ASTM
International, West Conshohocken, PA, 2005.
3.20 ASTM: Specification for Building Brick (Solid Masonry Units Made from Clay or Shale (C 62-05),
ASTM International, West Conshohocken, PA, 2005.

3.21 ASTM: Specification for Facing Brick (Solid Masonry Units Made from Clay or Shale) (C 216-05a),
ASTM International, West Conshohocken, PA, 2005.
3.22 ASTM:Specification for Hollow Brick (Hollow Masonry Units Made from Clay or Shale) (C652-05a),
ASTM International, West Conshohocken, PA, 2005.
3.23 ASTM: Specification for Concrete Brick (C55-03). ASTM International, West Conshohocken,
PA, 2003.
3.24 ASTM: Specification for Load Bearing Concrete Masonry Units (C90-06), ASTM International,
West Conshohocken, PA, 2006.
3.25 ASTM: Standard Test Method for Constructing and Testing Masonry Prisms used to Determine
Compliance with Specified Compressive Strength of Masonry (C1314-03b), ASTM International,
West Conshohocken, PA, 2003.