Page 171 - Dust Explosions in the Process Industries

144 Dust Explosions in the Process Industries

Cardillo, P., and E. J.Anthony. (1978) “The Flammability Limits of Hybrid Gas und Dust Systems.”
La Rivista dei Combustibili 32, pp. 390-395.
Carini, R. C., and K. R. Hules. (1987) “Coal Pulverizer Explosions.” In Industrial Dust Explosions,
ed. K. L. Cashdollar and M. Hertzberg. ASTM Special Technical Publication 958. Philadelphia:
ASTM, pp. 202-216.
Carpenter, D. L., and D. R. Davies. (1958) “The Variation with Temperature of the Explosibility
Characteristics of Coal Dust Clouds Using Electric Spark Ignition.” Combustion and Flame 2,
pp. 35-53.
Cashdollar,K. L., M. Hertzberg,and R. S. Conti. (1984,August) “Explosion Hazards of Oil Shale Dusts:
Limits, Pressures,and Ignitability.”Proceedings of the 17th Oil Shale Symposium. Golden: Colorado
School of Mines Press, pp. 243-254.
CENELEC, (1989, March) Requirements for the Selection, Installation and Use of Electrostatic
Spraying Equipment for Flammable Materials. Part 2: Hand-Held Electrostatic Powder Spray
Guns. Brussels: CENELEC.
Chatrathi, K., and R. De Good. (1988) Explosion Isolation Systemsused in Conjunctionwith Explosion
Vents. Unpublished manuscript. Blue Springs, MO: Fike Corporation.
Chauvin, R., R. Lodel, and J. L. Philippe. (1985) Spontaneous Combustion of Coal. Verneuil-en-
Halatte, France: CERCHAR.
Chauvin, R., R. Lodel, M. Nomine, et al. (1987) “Safety in Storageand Transport of Pulverized Coal.”
In Proceedings of the First European Dry Fine Coal Conference, Harrogate, UK.
Chiotti, P., and S. Yoshizaki. (1983) “Adsorption of Moisture by Grain Dust and Control of Dust
Hazards.” Proceedings of the Conference on Particulate Systems: Technology and Fundamentals,
Ames Laboratories, Ames, IA.
Christill, M., W. Nastoll, W. Leuckel, et al. (1989) “Der Einfluss von Stromungsturbulenz auf den
Explosionsablauf in Staubkuft-Gemischen.” VDZ-Berichte [VDI-VerlagGmbH, Dusseldorfl 701,
pp. 123-141.
Committee on Agricultw-e. (1982) “Reviewof Grain Elevator Safety.Hearing before the Subcommittee
on Wheat, Soybeans, and Feed Grains, House of Representatives, 97 Congress, 2d Sess., July 21,
1982.” Serial No. 97-YYY. Washington, DC: U.S. Government Printing Office.
Conti, R. S., K. L. Cashdollar, and I. Liebman. (1982) “Improved Optical Probe for Monitoring Dust
Explosions.” Review of ScientiJicInstruments 53, pp. 311-313.
Cox, R. A. (1986, September) Appraisal of the Utility of Risk Analysis in the Process Industry.
Proceedings of the Fifth International Symposium on Loss Prevention and Safety Promotion in the
Process Industries, Cannes, France.
Cox, R. A. (1987, February) “An Overview of Hazard Analysis.” In Proceedings of the Znternational
Symposium on the Prevention of Major Chemical Accidents, ed. J. L. Woodward.Washington, DC:
Center for Chemical Process Safety.
Crowhurst,D. (1988, October) “Small-scale Dust Explosions Vented through Ducts.” Proceedings of
the Third International Colloquium on Dust Explosions, Szxyrk, Poland.
Cross, J., and D. Farrer. (1982) Dust Explosions. New York and London: Plenum Press.
Cybulski, W. (1975) Coal Dust Explosions and their Suppression (English translation from Polish).
Warsaw:Foreign ScientificPublicationsDepartment of the National Center for Scientific,Technical
and Economical Information.
Czajor,W. (1984) “ExplosionstechnischeEntkopplungvon Apparaturen.” VDZ-Berichte [VDI-Verlag
GmbH, Diisseldorfl494, pp. 233-238.
Dahn, C. J. (1986, November) “Contribution of Low-Level Flammable Vapour Concentrations to
Dust Explosion Output.” Proceedingsof the Second InternationalColloquium on Dust Explosions,
Warsaw, Poland.
Dansk Brandvaerns-KomitC. (1987) Brandmaessige forhold forbundet med kulformaling og
den dertil hoerende opplagring og transport av kulmel. Copenhagen, Denmark: Dansk
Brandvaerns-KomitC.