Page 174 - Dust Explosions in the Process Industries

Dust Explosions:An Overview 147

Gibson, N. (1978, March) “Design of Explosion Protection for Dust Control Equipment.” In
Proceedings of the Symposium on Dust Control. London: Institution of Chemical Engineers.
Gibson, M.,D. J. Harper, and R. L. Rogers. (1985) “Evaluation of the Fire and Explosion Risk in Dlying
Powders.” Plant/Operations Progress 4, pp. 181-189.
Gibson, N., and F. C. Lloyd. (1965) “Incendivity of Discharges from Electrostatically Charged Plastics.”
British Journal ofApplied Physics 16, pp. 1619-1631.
Gillis, J. P. (1987) “Prevention of Dust Explosion Propagation through Ducting.” Proceedings of the
Powder and Bulk Solids Conference, Cahners Exposition Group, pp. 335-343.
Glarner, T. (1983) “Temperatureinflussauf das Explosions- und Zundverhalten brennbarer Stsube.”
Doctoral thesis no. 7350, ETH, Zurich.
Glarnel; T. (1984) “Mindestziindenergie-Einfluss der Temperatus.” VDZ-Berichte [VDI-Verlag GmbH,
Diisseldorfl 494, pp. 109-118.
Glor, M. (1985) “Hazards due to Electrostatic Charging of Powders.” Journal of Electrostatics 16,
pp. 175-191.
Glor, M. (1988) Electrostatic Hazards in Powder Handling. Letchworth, Hertfordshire, UM: Research
Studies Press Ltd.; New York: John Wiley and Sons.
Gopfert, H. (198 1) “Staubexplosionenin Verbindung mit Stetigfijrdern.”In Proceedings of Transmatic
81. Karlsi-uhe: Institut fur Fordertechnik, pp. 562-569.
Haase, H. (1972) Statische Elektrizitat als Gefahr, 2d ed. Weinheim: Verlag Chemie GmbH.
Hammer, P. R. (1978) “Eigeninestisiesung an Spriihtrocknern,Probleme aus der Licht des Herstellers.”
VDI-Berichfe [VDI-Verlag GmbH, Dusseldorfl 304, pp. 91-95.
Hammond, E., and B. H. Kaye. (1963, November) “The Growing Interest in Powders.” New Scientist
7, pp. 324-326.
Hannaiiny, A. (1990, September) “Flame Jet Hazards.” EuropEx Newsletter 13, pp. 9-16.
Harris,R. J. (1983) The Investigation and Control of Gas Explosions in Buildings and Heating Plant.
British Gas Corporation. London: E & FN Spon.
Hartmann, I. (1948) “Recent Research on the Explosibility of Dust Dispersions.” Zndustrial and
Engineering Chemistry 40, pp. 752-758.
Hartmann, I., A. R. Cooper, and M. Jacobson. (1950) “Recent Studies on the Explosibility of
Cornstarch.” Report Inv. 4725. Washington, DC: U.S. Bureau of Mines.
Hattwig, M. (1980, June) “Auswirkung von Druckentlastungsvorgbingenauf die Umgebung.” Report
ISSN 0172-7613. Berlin: BAM.
Hattwig, M., and M. Faber. (1984) “Ruckstosskrafte bei Explosionsdruckentlastung.” VDZ-Berichte
[VDI-Verlag GmbH, Diisseldorfl 494, pp. 219-226.
Hattwig, M., W. Hensel, and R. Qsswald. (1988, October) “The Prevention of Dust Explosions and
Fires in a Nuclear Reprocessing Plant.” Proceedings of the Third International Colloqium on Dust
Expl’osions,Technical University of Warsaw, Szczyrk, Poland.
HawksKey, J. L. (1989, June) “The Selective Use of the Elements of Quantitative Risk Assessment.”
Proceedings of the Sixth International Symposium on Loss Prevention and Safety Promotion in the
Process Industries, Norwegian Society of Chartered Engineers, Oslo.
Ne Kuangguo, Ding Xinwei, Bi Mingshu, and Li Zhiyi (1987) “The Dynamic Strength and
Venting Characteristics of Bursting Disks under Explosion.” In Proceedings of the Shenyang
International Symposium on Dust Explosions. Shenyang, Peoples Republic of China: NEU,
pp. 4211-434.
Heiner, H. (1986) “Inertisierung und Explosionsschutz in Silos durch CO,.” Die Erndhrungsindustrie,
no. 6, pp. 32-35.
Heinrich, H.-J. (1981) “Grundlagen fur die Einstufung von Kohlestauben in die Gefahr-klasse 4.2 der
Beforderungsvorschriften.” Armts- und Mitteilungsblatt der BAM 11,pp. 326-330.
Heinrich, H.-J. (1989) “Ablauf von Gas-und Staubexplosionen-Gemeinsamkeiten und Unterschiede.”
VDZ-Berichte [VDI-Verlag GmbH, Diisseldorfl 701, pp. 93-112.